Learn 11ty, Elixir and Nuxt

Eleventy was created to be a JavaScript alternative to Jekyll. It’s zero-config by default but has flexible configuration options. Eleventy works with your project’s existing directory structure.

Eleventy uses independent template engines. We don’t want to hold your content hostage. If you decide to use something else later, having your content decoupled in this way will make migration easier.

11ty

Our Twitch Scenes will use the static site generator Eleventy (11ty) to leverage templating features for creating the scenes. This lesson covers the base project which is available in the project repo under `/lessons/00-base`.

This lesson includes templating for the stream details and initial styling of the details section within the scene layout. The primary templating language in use is [Nunjucks](https://mozilla.github.io/nunjucks/templating.html).

Setup Eleventy Project for Creating Twitch Scenes

Vue (pronounced /vjuː/, like view) is a progressive framework for building user interfaces. Unlike other monolithic frameworks, Vue is designed from the ground up to be incrementally adoptable. The core library is focused on the view layer only, and is very easy to pick up and integrate with other libraries or existing projects. On the other hand, Vue is also perfectly capable of powering sophisticated Single-Page Applications when used in combination with modern tooling and supporting libraries.

In this video you'll learn how to use Amplify hosting to deploy a Nuxt site from a Git repository. We'll begin by walking through the steps of creating the deployment and configuring the correct build settings to enable a static build. Once the site is deployed, we'll view the live site hosted on AWS.

Deploying a Nuxt Site to AWS from a Git repository with Amplify hosting

In this video you'll learn how to deploy a static Nuxt site to AWS's global edge CDN in less than two minutes. We'll start from scratch, creating a new Nuxt site using npx and walk through the build configuration to set up the deployment target for Jamstack / static site hosting. From there, we'll initialize a new Amplify project using the Amplify CLI and walk through the settings to configure the proper build command for Amplify hosting. Finally, we'll deploy and view the live site. Once we're finished, we'll delete the project and the hosting service.

Deploying a Nuxt Site to AWS with the Amplify CLI

Elixir is a dynamic, functional language designed for building scalable and maintainable applications.

Elixir leverages the Erlang VM, known for running low-latency, distributed and fault-tolerant systems, while also being successfully used in web development and the embedded software domain.

elixir

Some common uses for pattern matching in Elixir include checking conditions and passing parameters into functions. It's useful for pulling out only specific variables from collections of data.

Additional resources:
- [Elixir docs on pattern matching](https://elixir-lang.org/getting-started/pattern-matching.html)

Pattern match in conditions and function parameters in Elixir

Elixir uses `=` as an operator, but rather than assigning values to variables with it, it *matches* values on the right hand side of the `=` with the left side. This can be used in simple values, more complex data structures, and powerful condition checking.

Put into simpler terms, pattern matching is Elixir's way of assigning variables.

Additional resources:
- [Elixir docs on pattern matching](https://elixir-lang.org/getting-started/pattern-matching.html)

Pattern match values in Elixir

These videos include the introductory steps to writing your first Elixir function and beginning to understand some key concepts in Elixir that make it unique. 

Some of those concepts include:
- the Mix build tool
- project structure
- collections of functions written in modules
- function *arity*
- pattern matching and common uses for it
- the pipe operator

Getting Started with Elixir

The syntax to pass arguments into functions is akin to many other languages. Elixir functions are uniquely recognized when running based off of the number of arguments passed in (a term called *arity*). This means you can define functions with the same name, so long as a different number of arguments is passed in.

Arity is a key concept to be aware of when reading documentation and writing your own code.

Additional resources:
- [Information about arity](https://elixir-lang.org/getting-started/modules-and-functions.html#function-capturing)
- [Default arguments in functions](https://elixir-lang.org/getting-started/modules-and-functions.html#default-arguments)

Pass arguments into Elixir functions and understand arity

Elixir code is organized into groups of functions called modules. You can create your own modules and built on top of predefined modules that are a part of Elixir by default.

Additional resources: 
- [Getting started with Modules and function from Elixir docs](https://elixir-lang.org/getting-started/modules-and-functions.html)

Write a New Function Inside of an Elixir Module

Bootstrap a new Elixir project using Mix (a build tool included when you install Elixir), with its built in project generation.

Additional resources:
- [Official introduction to Mix](https://elixir-lang.org/getting-started/mix-otp/introduction-to-mix.html#our-first-project)

Generate a new Elixir project using Mix

The pipe operator is an easy to use and powerful feature of Elixir. It takes the output from the expression on the left, and automatically passes it as the first argument to the function on the right. This is especially useful when chaining together multiple function calls or data transformations. Using the pipe operator results in code that's easier to read, write and refactor.

Chain Function Calls with the Pipe Operator in Elixir

URLs often reflect some bit of data that the page should load. This lesson walks you through adding a custom URL Param to the router then forwarding that Param to load data onto the page.

Load Data from URL Params in Vue.js and Nuxt.js

As you create more and more routes, the paths become difficult to manage and concatenate the parts together as just a giant string. Using named routes allows you to reference the route by a simple string then pass in the params as an object. This lesson covers configuring named routes in Nuxt.js in the `nuxt.config.js` and the passing the named route to a `router-link`.

Configure Named Routes in Vue.js and Nuxt.js

Sometimes the `pages/` directory structure doesn't meet your needs, so you'll need to customize your routes manually. Using the nuxt config and "hidden pages" you can map routes to view components without getting in the way of the default pages routing.

Add Custom Routes for Hidden Pages with Vue.js and Nuxt.js

Nuxt.js allows you to return a `Promise` from your `data` function so that you can asynchronously resolve data before displaying the page. This allows the server to fetch the data and render the page once it's ready.

Preload Data using Promises with Vue.js and Nuxt.js

Nuxt.js enables you to easily create layout and navigation by replacing the default App.vue template with your own `app.vue` layout in a `layouts` directory. Then you simply surround your content (the `<nuxt>` instance) with your navigation and/or layout and you're ready to go.

Create Vue.js Layout and Navigation with Nuxt.js

The vue-cli allows you to easily start up Vue projects from the command line while Nuxt.js enables a page-based routing system that follows your file structure. Combine these two projects and you'll have a Vue app created from scratch deployed in a matter of minutes.

Build Vue.js Apps with the Vue-CLI and Nuxt.js

Learn how to make flexible customized Twitch Scenes using the static site generator Eleventy (11ty), CSS, and ComfyJS.

Throughout this course, you'll create scenes for preshow, host, and main desktop display streaming purposes. Using ComfyJS, we'll add embedded chat and be able to create responses to chat commands. Finally, we'll see how to actually setup the scenes in OBS to prepare to use them for your stream.

Bonus: you'll learn a bit more about CSS grid layout, and also the "cicada principle" to be able to show the commands randomly across the scene!

Develop Custom Twitch Scenes and Setup in OBS


[Shadcn](https://ui.shadcn.com/docs) is a popular component library that allows you to install components into your codebase.

This lesson will show you how to install the [Table component](https://ui.shadcn.com/docs/components/table) and use that presentational component with [Tanstack table](https://tanstack.com/table/latest).


Create a Table Component with Shadcn and Tanstack Table

Build a dynamic table component in React using shadcn component library and tanstack react table.

TypeScript's satisfies operator finally clicked for me when I realized it's almost always used for specific implementations of configuration objects. So this lesson walks you through the naive approaches I've taken before and how to solve them using the satisfies operator. After this, satisfies will be another tool in your belt in TypeScript. To clean up all the TypeScript code you have around configuration.

TypeScript's "satisfies" for Configuration

Windsurf and Cursor are both able to take an image and then use an agent to build out what it sees in that image. This lesson is going to compare Windsurf and Cursor by uploading the same image to both and giving them the same prompt. Comparing not only the results, but also the steps that they take to get there. We'll also try uploading additional images throughout the process to see what they do as far as revising along the way and improving the site as they go along. 

Windsurf Cascade vs. Cursor Composer Agent: Build a Site from an Image

In this lesson, you'll discover how to style View Transitions using CSS pseudo-selectors to create custom animation effects. We'll transform the default cross-fade into a smooth slide transition by targeting the ::view-transition-old and ::view-transition-new pseudo-elements. You'll learn how these powerful selectors give you precise control over your transition animations, allowing you to create more engaging and personalized user experiences with just a few lines of CSS.

Customize View Transitions with CSS Using view-transition-old and view-transition-new

In this lesson, you'll learn how to implement smooth state transitions in your web applications using the browser's built-in View Transitions API. We'll create a simple example that demonstrates how to animate between different text states with just a few lines of code - no external libraries required. This powerful native API makes it easy to add professional-looking transitions to your user interface, enhancing the user experience with minimal effort.

Create Smooth UI Transitions with the Native View Transitions API

I've been using Cursor for a very long time and their "Agent" feature in Composer is fairly new, so I'm still getting used to it. But since Windsurf recently got onto the stage with their Cascade agent, they've slowly been gaining the mind share on the UX for coding agents. I decided to put them to the test by putting Windsurf and Cursor on the exact same screen side by side trying to accomplish the same task and to see which workflow I would prefer. I've been a diehard Cursor user for over a year now, so it's going to take a lot for me to switch to a different IDE. But I just have to say, even from this simple demo, Windsurf is looking pretty nice.

This lesson is just going to walk through creating a CLI using both tools to print out inspirational quotes and to explore how they approach the step-by-step of installing packages and running commands and setting up all the files we need to get this running.

Windsurf Cascade vs. Cursor Composer Agent Side-by-Side Comparison

This TypeScript tutorial explains how to use generics, allowing for different types to be passed as arguments. It discusses the use of shorthand syntax in generics and illustrates with examples. This method is useful for library creation, providing type safety and control to the user.

```typescript
interface PhotoMetadata<T> {
  title: string;
  takenAt: Date;
  customData: T;
}

// Function that processes a photo with custom metadata
function processPhoto<T>(photo: PhotoMetadata<T>): {
  processedTitle: string;
  daysSinceCapture: number;
  customDataSummary: T;
} {
  const today = new Date();
  const daysSinceCapture = Math.floor(
    (today.getTime() - photo.takenAt.getTime()) / (1000 * 60 * 60 * 24)
  );

  return {
    processedTitle: photo.title.toUpperCase(),
    daysSinceCapture,
    customDataSummary: photo.customData
  };
}

// Example usage with different custom data shapes
type CameraSettings = {
  iso: number;
  aperture: string;
  shutterSpeed: string;
}

type LocationData = {
  latitude: number;
  longitude: number;
  locationName: string;
}

// Using with camera settings
const photoWithCamera: PhotoMetadata<CameraSettings> = {
  title: "Sunset at beach",
  takenAt: new Date('2024-01-15'),
  customData: {
    iso: 100,
    aperture: "f/2.8",
    shutterSpeed: "1/1000"
  }
};

// Using with location data
const photoWithLocation: PhotoMetadata<LocationData> = {
  title: "Mountain vista",
  takenAt: new Date('2024-02-01'),
  customData: {
    latitude: 45.5231,
    longitude: -122.6765,
    locationName: "Mount Hood"
  }
};

const processedCameraPhoto = processPhoto(photoWithCamera);
const processedLocationPhoto = processPhoto(photoWithLocation);

processedCameraPhoto.customDataSummary.iso
processedLocationPhoto.customDataSummary.longitude

```

Basic Explanation of Typescript Generics

A very basic explanation of generic function arguments

I've been using Cursor as my primary editor for over a year now, but recently I've heard wonderful things about Windsurf AI Agent features. I decided to record myself building out something I've always wanted to make, but never made the time for.

In this lesson, I demonstrate how to leverage Windsurf's powerful agent process to create a fun word-guessing game inspired by Heads Up. Watch as I build an interactive application featuring category selection and word navigation, complete with data hosting on GitHub Gists and deployment to GitHub Pages - all in under 30 minutes (before editing the lesson down to 12 minutes)!

What makes this project particularly exciting is how Windsurf eliminates the typical friction points of development. While this game was always on my project wishlist, the overhead of setup, configuration, and deployment made it hard to justify the time investment. Windsurf's agent process handles all these pain points seamlessly, from managing URLs to orchestrating deployment.

This lesson perfectly showcases how AI agents can help developers bring their backlog of project ideas to life, transforming what would typically be time-consuming tasks into efficient, enjoyable development experiences.

Build a Word Game with Windsurf's Cascade AI Agent



Discover how to harness the power of Cursor IDE's Composer Agent feature to optimize your code. In this lesson, you'll witness an AI agent doing all the work to generate test suites, implement performance benchmarks, and create optimized function variations - all without writing a single line of code. You'll learn how to validate performance improvements through data-driven benchmarking, ensuring that optimizations are backed by concrete metrics rather than speculation. This hands-on demonstration showcases a groundbreaking approach to automated function development that combines the precision of test-driven development with the efficiency of AI-powered optimization.


Agent-Driven Development in Cursor: Testing, Benchmarking, and Optimizing Functions

This course is aimed for using `zod` effectively in projects based on TypeScript (both browser and node.js). The benefits you gain with this course is not just simply coding, but also understanding when/why/how should you perform runtime validation.

`zod` is the missing piece to TypeScript's capabilities, which can guarantee type-safety only in compile-time.

`zod` can be used whenever the compiler cannot guarantee what happens in runtime. And... it's a very frequent usecase, such as HTTP calls, websockets, etc.

In this course you get quickly up and running by:
1. using `zod` with primitives and objects
2. adapting `zod` quickly to existing projects thanks to automatic generators
3. changing the strategy frm type-first to schema-first
4. using error-throwing `parse` or non-error-throwing `safeParse` basing on your needs
5. applying `zod` to the most common usecase - validating API responses
6. handling errors the most convenient way (out of many!)

Take advantage of runtime validation with `zod`. Take advantage of the detailed lessons in this course 🔥

Search

Search Results