Learn Alpine, Browserify and Pm2

Welcome to this beginner level series on Alpine JS! 👋🏞

Alpine JS is a rugged, minimal framework for composing JavaScript behaviour in your markup. It brings declarative, reactive, data-driven nature of libraries like React or Vue to your HTML templates.

In this series, you will learn about Alpine's handy **directives**. You'll discover how to define a component scope with `x-data`, run code on mount with `x-init`, attach event listeners with `x-on`, display data with `x-text`, decide wether or not to show an element with `x-show`, iterate through data with `x-for`, retrieve a DOM element with `x-ref`, learn how to achieve _two-way data binding_ with `x-model`, and much more.

You'll also learn how **"modifiers"** can be applied and chained to directives to provide additional functionality: control the animation transition of entering and leaving DOM elements, debounce an event listener, etc.

We'll also touch on what Alpine calls **"magic properties"**, which give you access to native browser events (`$event`), reference to DOM elements (`$refs`), and more.

You'll gradually discover Alpine's API and syntax, from building simple tabs to a mini app that fetches a dog picture based on a "breed" search field. 🐶

**Get ready to breathe some fresh air** - it's time to walk into cool, green Alpine pastures! 🏞

Alpine.js offers you the reactive and declarative nature of big frameworks like Vue or React at a much lower cost.

You get to keep your DOM, and sprinkle in behavior as you see fit.

alpine

Sprinkle declarative, reactive behaviour on your HTML with Alpine JS

In this lesson, we learn how the `x-init` directive in Alpine JS lets us run a JavaScript expression once the component has initiated.

We see the nuances that allow us to trigger that code before Alpine performs initial DOM updates, or after these updates have been made.

Focus in input field on page load with `x-init` in Alpine JS

In this lesson, we define a "count" state value with the `x-data` directive provided by Alpine JS. This defines a new scoped component, which can have access to this state.

We then display the "count" value in our HTML with the `x-text` directive, which updates an element's `innerText` value.

We also hook up buttons with click event listeners with `x-on:click`, which allows us to modify the count value as desired.

Update a count state value with the x-on event listener directive in Alpine JS

In this lesson, we create a set of tabs with Alpine JS, where only the content of the currently active tab is visible. To do this, we define an `activeTab` state value with `x-data. We then wire up our buttons to change the value of `activeTab` on click, and use `x-show` to determine if the tab content should be visible or not, based on the value of `activeTab`.

We also take control of the `class` attribute with `x-bind`, and we conditionally output an "active" class based on, you guessed it, the value of `activeTab`.

Toggle visibility and styles based on state with `x-show` and `x-bind` in Alpine JS

In this lesson, we move the component definition to a function, defined in a script tag in the HTML document.

We then iterate through an Array of Objects with the `x-for` directive in Alpine JS. We use a `<template>` tag to wrap the HTML element we want to repeat for each item, and put the `x-for` directive on that template tag.

We also define a "computed" property by adding a method on our function, which checks if a given ID matched the currently active tab id. This computed property allows us to determine wether or not to apply the "active" classname to our tab buttons.

Iterate through data with the `x-for` attribute in Alpine JS

In this lesson, we smoothen the transitions between tabs by applying a `transition` modifier to our `x-show` directive.

We see how we can ignore the leaving elements, and focus the animation on the entering elements. We tweak the transition duration and origin by chaining additional modifiers to our `x-show` directive.

Control enter and leave transitions with the `x-show.transition` modifier in Alpine JS

In this lesson, we see how the `x-model` directive makes achieving "two-way data binding" effortless in Alpine JS.

We see what it would take to recreate the same functionality with an `x-bind` directive for the input value, as well as an `@input` event listener which, thanks to an access to the browser's native events via the `$event` magic property, sets the state value to `$event.target.value`.

Keep a DOM input and state value in sync with the `x-model` directive in Alpine JS

In this lesson, we learn how to retrieve a DOM element via the `x-ref` directive in Alpine JS, which gives us a reference to the element it is applied on. In our case, an input field.

We can then use the `$refs` object, and reach for the ref we need to target.

This allows us to trigger the focus state of the input field, with the `.focus()` method.

Focus an input field on button click with `x-ref` and the `$refs` property in Alpine JS

In this lesson, we build a little app that fetches dog photos from the dog.ceo API, based on a "breed" search field. We want the API call to happen again when the search value changes, and to do so we use the `$watch` property from Alpine JS, which lets us define what state property we want to watch, and what callback function to run when a change happens.

We also use the `debounce` modifier on the `x-model` property to avoid firing an API call on each keystroke.

Refetch API data when a state value changes with the `$watch` property in Alpine JS

Welcome to this beginner level series on Alpine JS! 👋🏞

Alpine JS is a rugged, minimal framework for composing JavaScript behaviour in your markup. It brings declarative, reactive, data-driven nature of libraries like React or Vue to your HTML templates.

This is the series intro video. Let's get started!

Series Intro - Beginner Level Alpine JS

Browserify lets you require('modules') in the browser by bundling up all of your dependencies.

browserify

Building upon the `watch` task that we begin this lesson with, we’ll look at how to create a local development server using the `app` directory as the web root. By using Browsersync to achieve this, we can also instruct all connected browsers to automatically reload each time our bundle is re-generated. Browsersync has a public `.stream()` method that is designed exactly for this purpose.

Gulp and Browserify - Adding Live Reload with Browsersync

PM2 is a production process manager for Node.js applications with a built-in load balancer. It allows you to keep applications alive forever, to reload them without downtime and to facilitate common system admin tasks.

This video shows how to enable features in your pm2 config file that allow you to prevent runaway apps from bringing your server down. Setting max memory used, number of running processes allowed and maximum restart attempts are all covered.

Controlling runaway apps using pm2

Gulp is a toolkit for automating painful or time-consuming tasks in your development workflow, so you can stop messing around and build something.

gulp

What is already a nice workflow using Gulp, Browserify, Watchify & Browsersync to enable auto rebuilds & live browser reloading can be further improved by adding Babelify. A simple wrapper around the popular transpiler Babel, Babelify can ‘transform’ source files as they pass through our stream to enable certain Javascript features not yet available in the Browser or Node. We end the lesson by looking at how to generate & extract sourcemaps using `exorcist`.

Gulp and Browserify - Adding Babel & Source Maps

In this video, you will learn how to pass environment variables to your node.js app using the pm2 config file. This is useful for setting options inside your app such as production or development.

Passing environment variables to node.js using pm2

Let's look at the basics of setting up Gulp and Browserify. Creating a Gulp task from scratch, we'll cover how to utilise the Browserify API to generate a single `bundle.js` file, catch and log any errors that occur in the compilation process, transform the stream into a format that can be consumed by `gulp.dest` and finish by writing the bundle to a `dist` directory.

Gulp and Browserify - Initial Setup

In this video, learn how to automatically restart your node.js app using pm2 when the code for your app changes. You will also learn how to exclude files and directories from restarting your app (such as static assets, css, images, etc.).

Restarting your node.js app on code change using pm2

Beginning with a single Gulp task capable of generating a one-time Browserify bundle, we enable file-watching and incremental rebuilds by incorporating Watchify. We add a second task `watch` & refactor our initial code to enable the bulk of it to be re-used. We’ll look at exactly how to ‘wire’ these tools together and how the relationship between Watchify & Browserify can manifest into a seriously efficient workflow.

Topics

Instructors

Content Type