Learn Angular-cli, Elixir and Radium

These videos include the introductory steps to writing your first Elixir function and beginning to understand some key concepts in Elixir that make it unique. 

Some of those concepts include:
- the Mix build tool
- project structure
- collections of functions written in modules
- function *arity*
- pattern matching and common uses for it
- the pipe operator

Elixir is a dynamic, functional language designed for building scalable and maintainable applications.

Elixir leverages the Erlang VM, known for running low-latency, distributed and fault-tolerant systems, while also being successfully used in web development and the embedded software domain.

elixir

Getting Started with Elixir

Bootstrap a new Elixir project using Mix (a build tool included when you install Elixir), with its built in project generation.

Additional resources:
- [Official introduction to Mix](https://elixir-lang.org/getting-started/mix-otp/introduction-to-mix.html#our-first-project)

Generate a new Elixir project using Mix

Elixir code is organized into groups of functions called modules. You can create your own modules and built on top of predefined modules that are a part of Elixir by default.

Additional resources: 
- [Getting started with Modules and function from Elixir docs](https://elixir-lang.org/getting-started/modules-and-functions.html)

Write a New Function Inside of an Elixir Module

The syntax to pass arguments into functions is akin to many other languages. Elixir functions are uniquely recognized when running based off of the number of arguments passed in (a term called *arity*). This means you can define functions with the same name, so long as a different number of arguments is passed in.

Arity is a key concept to be aware of when reading documentation and writing your own code.

Additional resources:
- [Information about arity](https://elixir-lang.org/getting-started/modules-and-functions.html#function-capturing)
- [Default arguments in functions](https://elixir-lang.org/getting-started/modules-and-functions.html#default-arguments)

Pass arguments into Elixir functions and understand arity

Elixir uses `=` as an operator, but rather than assigning values to variables with it, it *matches* values on the right hand side of the `=` with the left side. This can be used in simple values, more complex data structures, and powerful condition checking.

Put into simpler terms, pattern matching is Elixir's way of assigning variables.

Additional resources:
- [Elixir docs on pattern matching](https://elixir-lang.org/getting-started/pattern-matching.html)

Pattern match values in Elixir

Some common uses for pattern matching in Elixir include checking conditions and passing parameters into functions. It's useful for pulling out only specific variables from collections of data.

Additional resources:
- [Elixir docs on pattern matching](https://elixir-lang.org/getting-started/pattern-matching.html)

Pattern match in conditions and function parameters in Elixir

React is one of the web’s most popular frameworks for building JavaScript applications. 

If you know what you’re doing, React can drastically simplify how you build, use, and maintain code.

Whether you’re a React newbie or you’re ready for advanced techniques, you can level-up with egghead. Explore our in-depth courses, lessons, and community resources to build more powerful applications and crack open your career.

react

In a CSS library like Bootstrap we can set a button's style to be "primary" or "secondary" by appending classes. For React components we want to be able to do this via props. Radium enables this by composing styles via an array. This mimicks the cascade of CSS.  

Radium: Updating Button Styles via Props

React's inline styles allow components to stand on their own by not requiring any external CSS. However HTML's style attributes don't support pseudo selectors like `:hover` and `:active`. By using Radium to listen to mouse events we can restore `:hover` and `:active` selectors to inline styles.

Styling a React button component with Radium

angular-cli

Generating components with the Angular CLI allows for scaffolding applications quickly. Learn what will be generated for you and how to generate quickly with shortcuts in the desired directory.

Generate components with the Angular CLI

Angular is a development platform for creating applications using modern web standards. Angular includes a wealth of essential features such as mobile gestures, animations, filtering, routing, data binding, security, internationalization, and beautiful UI components. It's extremely modular, lightweight, and easy to learn.

angular

Getting started with angular development can be difficult, with a lot of moving parts. Allow the Angular CLI to handle those complexities so you can focus on creating great applications.

In this lesson you will learn how to install the Angular CLI from npm, create a new application, serve the new application in the browser and edit it with live-reload.

Install the Angular CLI to Create and Serve an Angular Application

In this lesson we will our `UiModule`, that has a `LayoutComponent`, `HeaderComponent` and `FooterComponent`. 

We generate `UiModule` by running the following command:
```
ng generate module ui --module app
```

This generates the new module and imports it in our `AppModule`.

We'll create the `LayoutComponent` using:
```
ng generate component ui/containers/layout
ng generate component ui/containers/header
ng generate component ui/containers/footer
``` 

We update our `AppRoutingModule` and add this component to our first route to make it visible. 

The `HeaderComponent` and `FooterComponent` are referenced in the LayoutComponent and we implement the actual templates!

Create Application Layout with Components in an Angular CLI Project

In this lesson we will add the `ProductModule`, where our actual application code will live.

```
ng g m product --routing
``` 

We will add 2 routes to `AppRoutingModule`,  the first is a redirect route that redirects any unhandled paths to `products`. The second route is the actual `products` route, that 'lazy-loads' the `ProductModule`.

We use the `ng` command to create the `ProductListComponent` and `ProductDetailComponent`, which are so called 'containers components'.

Container components are responsible for fetching data, handling routes and passing data into the 'presentational components' 

We will add 2 routes to `ProductRoutingModule`,  one to each of our new Container Components.

Lastly we will use  `ActivatedRoute` in `ProductDetailComponent` to fetch the `:id` from the route.

Create Container Components for Retrieving Data in an Angular CLI Project

In this lesson we will create the presentational components for the product list and detail pages. These components define how the data is displayed and are being referenced from the Container components.

The new components are `ProductsComponent` and `ProductComponent`.

After using `ng generate` to generate these components, we will update the `ProductListComponent` to invoke `ProductsComponent` and pass in our local `products` array.

In `ProductsComponent` we loop over each of the items we get from the `@Input() products` and pass each one into our `ProductComponent`.

The `ProductComponent` has 2 `Inputs()`, one for the `Product` and a `boolean` that toggles showing the product details. This is useful because don't want to show product details in the list view.

After the `ProductComponent` is implemented the last step is to reference it from the `ProductDetails` container component. 

Create Presentational Components for Displaying Data in an Angular CLI Project

In this lesson we will create the `ProductsService` that is responsible for the interaction with our API. 

We will inject the `HttpClient` that we get from `@angular/common/http`. To make this working we need to import `HttpClientModule` in our `AppModule`.

We define a `getProducts` and `getProduct` method so we can get a list of products and an single product which we will use in respectively the `ProductList` and `ProductDetail` components. 

In both components we will use the `ngOnInit` lifecycle hook to invoke the methods on the service, and retrieve the data by subscribing to it. 

[Link to product api used in lessons](https://github.com/beeman/egghead-products-api)

Create an Angular Service to Retrieve Data from an API 

In our 'container components' we use the `ngOnInit` lifecycle hook to subscribe to our service. While this works, there is a downside: the components get loaded before the data is available, which results in that we show empty components. This is particularly visible on slow connections.

To fix this we create a `ProductsResolver`, and implement the `resolve` method that fetches the data from the service. In `ProductRoutingModule` we add the `resolve` property to our route, and add make the `ProductsResolver` resolve and store the data in the `products` property.

Inside our `ngOnInit` in `ProductListComponent` we can now subscribe to the route data, which makes the usage of the service in this component obsolete.

We do the same for the `ProductDetailComponent`. After this there are no longer empty components, the router will not navigate after the data is retrieved.

Create Angular Resolvers to retrieve the product data from the Service

In this lesson we will install the latest version of Angular CLI and use the `ng new` command to scaffold out the application.

Scaffold a New Angular App using Angular CLI

In this lesson we will add Bootstrap to our project. This allows us to focus on building our app without having to spend too much time writing custom CSS.

We will use grab the URL too the Bootstrap CSS from [bootstrapcdn.com](https://www.bootstrapcdn.com/)  and add it to our project by adding a `@import url('')` statement to `src/styles.scss`.

Add Bootstrap to an Angular CLI Project

The default Angular CLI configuration generates components that consist of 4 files. The component class, an HTML template, a stylesheet and a spec file that contains the unit test.

In order to keep our components concise we  update our `AppComponent` and move the template and style from an external file to inline. This allows us to delete the 2 external files. 

We can configure our project to generate the template and the style 'inline' by default.

To do this we run the commands:
```
ng config schematics.@schematics/angular.component.inlineStyle true
ng config schematics.@schematics/angular.component.inlineTemplate true
```

The changes are made to `angular.json` in the project root.


Configure Defaults for Generating Code with Angular CLI

A default Angular application ships with two default environment files that can store constants that are different for each environment, one for development and the other for production.

We will define the `apiUrl` constant in both development and production environments. 

The value for development is  `http://localhost:3000/api` and the value for production is `https://egghead-products-api.now.sh/api` .

In `angular.json` we can find a `configurations` object where our `production` build is defined. We can see that in a production build, the `environment.prod.ts` will replace `environment.ts`.

[Link to product api used in lessons](https://github.com/beeman/egghead-products-api)

Use the Angular CLI Environment to Define Constants

In this lesson we will add Server Side Rendering to our application using Angular Universal.  We'll build a simple Express application and see how Angular Universal builds and renders our app on the server. 

Since Angular CLI v6 we can simple run `ng generate universal --clientProject store`, where `store` is the name of our app.

In `angular.json` in the `architect.server` object we define a `configurations` object, to make sure the correct environment gets copied on a production build.

To make Angular Universal with lazy loaded modules we need to add the `ModuleMapLoaderModule` to `AppServerModule`, which we get after installing ` @nguniversal/module-map-ngfactory-loader` from npm. 

```
npm install --save @nguniversal/module-map-ngfactory-loader @nguniversal/express-engine
```

In the project root we implement a `server.ts` and define our simple express server.

When we run the new server we see that the app gets rendered before it hits the browser.

Server Side Render an Angular CLI Project with Angular Universal

In this lesson we will add support for deploying our application to [now.sh](https://zeit.co/now).

We will create a `now` object in package.json where we configure the name, the alias and the list of files we want to deploy.

We create an npm run-script called `now-build` and set the value to `true` to skip building the project on `now.sh`. The second run-script called `now` invokes `now deploy && now alias`. 

After this we sun `npm run build && npm run now` to build and deploy our app!

Topics

Instructors

Content Type