Learn Angular-cli, Greensock and Nightmare

Animations attract the eye and add a higher level of engagement for your users. But they’re not easy to set up, and they don’t always look the way they should on every browser. 

Greensock is the best platform available for creating performant, highly-customizable animations. This course will walk you through the features of Greensock, including how to:

- animate an element
- manually control an animation
- animate between CSS classes

…and more, with cross-browser support to ensure your animations look sharp everywhere.

Ultra high-performance, professional-grade HTML5 animation for the modern web

greensock

Create Amazing Animations with GreenSock

GreenSock supports all of the CSS3 3d properties, so you can freely rotate around X, Y, and Z axises with rotationX, rotationY, and rotationZ. Once that's set up, you can tweak the perspective of the element with transformPerspective.

Spin Elements in 3d with GreenSock

By default, elements use their own perspective, so if you rotate multiple elements on the page the perspective will seem a bit off for each of them. The solution is to set the perspective on the container element, then each child element will follow the parents' perspective.

Control the Shared 3d Perspective of Multiple Elements with GreenSock

Sometimes you want to leave an animation looping without any user interaction. This is done using the "repeat" and "yoyo" properties combined to keep the tween moving back and forth from the start properties to the end properties.

Loop a Tween Forever Using Yoyo and Repeat with GreenSock

The `gsap.set()` tween (or animation container) is a zero-duration tween that instantly applies a property to an HTML element. In addition, there is a subtle but important difference between `opacity` and Greensock's `autoAlpha` properties. You will learn how to hide a menu on page load and also how to prevent the element from flashing on page load. This lesson contains Greensock's basic building blocks that are used to create advanced animations with UI elements.

To add the latest Greensock library to your project, go to [Greensock's website](https://greensock.com/). Fun fact: GSAP stands for Greensock Animation Platform, and their current latest version is GSAP 3!

A common programming convention for Greensock I like to follow is, if you're going to animate a property with Greensock, keep it in Greensock, otherwise, if you are not going to animate a property, keep it in your CSS.

Hide a Menu with GSAP3's set() Tween and autoAlpha Property

Nightmare is a high-level browser automation library.

The goal is to expose just a few simple methods, and have an API that feels synchronous for each block of scripting, rather than deeply nested callbacks. It's designed for automating tasks across sites that don't have APIs.

nightmare

Many pages you'll want to grab data from will require you to log in first. This video demonstrates how to log in and grab whatever data off the page you will need.

Scraping Data from Sites with Login Forms with Nightmare

angular-cli

Generating components with the Angular CLI allows for scaffolding applications quickly. Learn what will be generated for you and how to generate quickly with shortcuts in the desired directory.

Generate components with the Angular CLI

Angular is a development platform for creating applications using modern web standards. Angular includes a wealth of essential features such as mobile gestures, animations, filtering, routing, data binding, security, internationalization, and beautiful UI components. It's extremely modular, lightweight, and easy to learn.

angular

Getting started with angular development can be difficult, with a lot of moving parts. Allow the Angular CLI to handle those complexities so you can focus on creating great applications.

In this lesson you will learn how to install the Angular CLI from npm, create a new application, serve the new application in the browser and edit it with live-reload.

Install the Angular CLI to Create and Serve an Angular Application

Many websites have more than just simple static content. Dynamic content which is rendered by JavaScript requires browser to be able to scrape data. This video demonstrates how to use Nightmare (which is a wrapper around Electron) to launch a url and scrape dynamic data.

Scraping Dynamic JavaScript Websites with Nightmare

In this lesson, we will look at Greensock's Draggable API. We will implement a scrollable `<div>` container and explore some options available.

Create scrollable DOM elements with Greensock

In this lesson we will our `UiModule`, that has a `LayoutComponent`, `HeaderComponent` and `FooterComponent`. 

We generate `UiModule` by running the following command:
```
ng generate module ui --module app
```

This generates the new module and imports it in our `AppModule`.

We'll create the `LayoutComponent` using:
```
ng generate component ui/containers/layout
ng generate component ui/containers/header
ng generate component ui/containers/footer
``` 

We update our `AppRoutingModule` and add this component to our first route to make it visible. 

The `HeaderComponent` and `FooterComponent` are referenced in the LayoutComponent and we implement the actual templates!

Create Application Layout with Components in an Angular CLI Project

In this lesson we will add the `ProductModule`, where our actual application code will live.

```
ng g m product --routing
``` 

We will add 2 routes to `AppRoutingModule`,  the first is a redirect route that redirects any unhandled paths to `products`. The second route is the actual `products` route, that 'lazy-loads' the `ProductModule`.

We use the `ng` command to create the `ProductListComponent` and `ProductDetailComponent`, which are so called 'containers components'.

Container components are responsible for fetching data, handling routes and passing data into the 'presentational components' 

We will add 2 routes to `ProductRoutingModule`,  one to each of our new Container Components.

Lastly we will use  `ActivatedRoute` in `ProductDetailComponent` to fetch the `:id` from the route.

Create Container Components for Retrieving Data in an Angular CLI Project

In this lesson we will create the presentational components for the product list and detail pages. These components define how the data is displayed and are being referenced from the Container components.

The new components are `ProductsComponent` and `ProductComponent`.

After using `ng generate` to generate these components, we will update the `ProductListComponent` to invoke `ProductsComponent` and pass in our local `products` array.

In `ProductsComponent` we loop over each of the items we get from the `@Input() products` and pass each one into our `ProductComponent`.

The `ProductComponent` has 2 `Inputs()`, one for the `Product` and a `boolean` that toggles showing the product details. This is useful because don't want to show product details in the list view.

After the `ProductComponent` is implemented the last step is to reference it from the `ProductDetails` container component. 

Create Presentational Components for Displaying Data in an Angular CLI Project

In this lesson we will create the `ProductsService` that is responsible for the interaction with our API. 

We will inject the `HttpClient` that we get from `@angular/common/http`. To make this working we need to import `HttpClientModule` in our `AppModule`.

We define a `getProducts` and `getProduct` method so we can get a list of products and an single product which we will use in respectively the `ProductList` and `ProductDetail` components. 

In both components we will use the `ngOnInit` lifecycle hook to invoke the methods on the service, and retrieve the data by subscribing to it. 

[Link to product api used in lessons](https://github.com/beeman/egghead-products-api)

Create an Angular Service to Retrieve Data from an API 

In our 'container components' we use the `ngOnInit` lifecycle hook to subscribe to our service. While this works, there is a downside: the components get loaded before the data is available, which results in that we show empty components. This is particularly visible on slow connections.

To fix this we create a `ProductsResolver`, and implement the `resolve` method that fetches the data from the service. In `ProductRoutingModule` we add the `resolve` property to our route, and add make the `ProductsResolver` resolve and store the data in the `products` property.

Inside our `ngOnInit` in `ProductListComponent` we can now subscribe to the route data, which makes the usage of the service in this component obsolete.

We do the same for the `ProductDetailComponent`. After this there are no longer empty components, the router will not navigate after the data is retrieved.

Create Angular Resolvers to retrieve the product data from the Service

In this lesson we will install the latest version of Angular CLI and use the `ng new` command to scaffold out the application.

Scaffold a New Angular App using Angular CLI

In this lesson we will add Bootstrap to our project. This allows us to focus on building our app without having to spend too much time writing custom CSS.

We will use grab the URL too the Bootstrap CSS from [bootstrapcdn.com](https://www.bootstrapcdn.com/)  and add it to our project by adding a `@import url('')` statement to `src/styles.scss`.

Add Bootstrap to an Angular CLI Project

The default Angular CLI configuration generates components that consist of 4 files. The component class, an HTML template, a stylesheet and a spec file that contains the unit test.

In order to keep our components concise we  update our `AppComponent` and move the template and style from an external file to inline. This allows us to delete the 2 external files. 

We can configure our project to generate the template and the style 'inline' by default.

To do this we run the commands:
```
ng config schematics.@schematics/angular.component.inlineStyle true
ng config schematics.@schematics/angular.component.inlineTemplate true
```

The changes are made to `angular.json` in the project root.


Configure Defaults for Generating Code with Angular CLI

A default Angular application ships with two default environment files that can store constants that are different for each environment, one for development and the other for production.

We will define the `apiUrl` constant in both development and production environments. 

The value for development is  `http://localhost:3000/api` and the value for production is `https://egghead-products-api.now.sh/api` .

In `angular.json` we can find a `configurations` object where our `production` build is defined. We can see that in a production build, the `environment.prod.ts` will replace `environment.ts`.

[Link to product api used in lessons](https://github.com/beeman/egghead-products-api)

Use the Angular CLI Environment to Define Constants

In this lesson we will add Server Side Rendering to our application using Angular Universal.  We'll build a simple Express application and see how Angular Universal builds and renders our app on the server. 

Since Angular CLI v6 we can simple run `ng generate universal --clientProject store`, where `store` is the name of our app.

In `angular.json` in the `architect.server` object we define a `configurations` object, to make sure the correct environment gets copied on a production build.

To make Angular Universal with lazy loaded modules we need to add the `ModuleMapLoaderModule` to `AppServerModule`, which we get after installing ` @nguniversal/module-map-ngfactory-loader` from npm. 

```
npm install --save @nguniversal/module-map-ngfactory-loader @nguniversal/express-engine
```

In the project root we implement a `server.ts` and define our simple express server.

When we run the new server we see that the app gets rendered before it hits the browser.

Server Side Render an Angular CLI Project with Angular Universal

In this lesson we will add support for deploying our application to [now.sh](https://zeit.co/now).

We will create a `now` object in package.json where we configure the name, the alias and the list of files we want to deploy.

We create an npm run-script called `now-build` and set the value to `true` to skip building the project on `now.sh`. The second run-script called `now` invokes `now deploy && now alias`. 

After this we sun `npm run build && npm run now` to build and deploy our app!

Topics

Instructors

Content Type