Learn Chai, Flexbox and Nuxt

Vue (pronounced /vjuː/, like view) is a progressive framework for building user interfaces. Unlike other monolithic frameworks, Vue is designed from the ground up to be incrementally adoptable. The core library is focused on the view layer only, and is very easy to pick up and integrate with other libraries or existing projects. On the other hand, Vue is also perfectly capable of powering sophisticated Single-Page Applications when used in combination with modern tooling and supporting libraries.

In this video you'll learn how to use Amplify hosting to deploy a Nuxt site from a Git repository. We'll begin by walking through the steps of creating the deployment and configuring the correct build settings to enable a static build. Once the site is deployed, we'll view the live site hosted on AWS.

Deploying a Nuxt Site to AWS from a Git repository with Amplify hosting

In this video you'll learn how to deploy a static Nuxt site to AWS's global edge CDN in less than two minutes. We'll start from scratch, creating a new Nuxt site using npx and walk through the build configuration to set up the deployment target for Jamstack / static site hosting. From there, we'll initialize a new Amplify project using the Amplify CLI and walk through the settings to configure the proper build command for Amplify hosting. Finally, we'll deploy and view the live site. Once we're finished, we'll delete the project and the hosting service.

Deploying a Nuxt Site to AWS with the Amplify CLI

The specification describes a CSS box model optimized for user interface design. In the flex layout model, the children of a flex container can be laid out in any direction, and can “flex” their sizes, either growing to fill unused space or shrinking to avoid overflowing the parent.

flexbox

With just a handful of CSS properties, we can create an intrinsically responsive photo gallery using flexbox. This is accomplished by setting our preferred width as the `flex-basis` value and allowing items to both shrink and grow. The use of `object-fit: cover` on images allows them to fully fill up the list item without distortion or overflow. We finish the gallery with a small animated effect that alters `opacity`.

Create an Automatically Responsive Flexbox Gallery

CSS Grid and Flexbox are very useful tools for providing the overall layout of a page.  I take a specific design and create the high level layout using css grid and then arrange an individual section using flex box.

Layout a webpage using css grid and flexbox

See how to use flexbox to layout variable-width content in columns, and take advantage of `justify-content` to keep flex children center-aligned on smaller viewports. We'll also learn how `margin` can be applied to resolve for lack of a well-supported `gap` property in flexbox. At the end of the lesson, we'll have styled both the "Subscribe" section and the site footer.

Use Flexbox to Responsively Layout Variable-Width Content

It's tempting to pick up a framework which has preselected flexbox or grid as the layout tool of choice, but it's important to learn when and why to use each method. This leads to slimmer stylesheets which results in better site performance, and less likelihood for "hacks" to make one method do what the other does inherently better. 

Throughout this collection, we will be progressively styling a responsive landing page template while building your knowledge on when to select grid or flexbox for any layout scenario. Spoiler alert: sometimes the best solution is using both!

Create a Landing Page with CSS Grid and Flexbox

Learn the fundamental difference between CSS grid and flexbox layout, and create utility classes for each `display` value. Then begin to apply and expand these concepts to style the landing page navigation.

Choose Between Grid or Flexbox for CSS Layout

We have a parent HTML element that takes up the height and width of the page. We will make that parent element into a flex container, and then vertically center its child element using `align-items: center;`. Finally, we'll use `justify-content: center;` to horizontally center the element.

Center an Element Horizontally and Vertically using Flexbox

Flexbox is a powerful way to layout HTML so that elements can grow to fit the size of their container.  It can also control how the elements are positioned within a flexed container.  

Once you start thinking in `rows` and `columns`, you can control almost any flexed layout with just a few simple flexbox layout primitives.

Get Started with Flexbox CSS Layouts

To stretch individual elements to fit the given space, we can set the `flex-grow` or `flex` attributes to any integer.  Other surrounding elements will grow proportionally to their `flex-grow` or `flex` attributes.

Proportionally Grow a Flexed Element by Setting `flex-grow` or `flex` Styles

To set the wrap settings of elements inside of a container, we can set the `flex-wrap` css attribute.  The most common values are: `nowrap`, `wrap`, or `wrap-reverse`

Wrap Elements Inside of a Flexed Container with `flex-wrap`

We changed the axis layout with 'justify-content', and the "off axis" layout is controlled by 'align-items'.  The most common values are `flex-start`, `flex-end`, or `center`.

Change the off-axis Alignment of a Flexed Container with `align-items`

We can space items inside of a flexed component in the "on-axis" direction, with `justify-content`.

Justify content can take the following values: `flex-start`, `flex-end`, `center`, `space-between`, `space-around`, or `space-evenly`

Change the Spacing of Flexed Components with justify-content

After setting `display: flex` on a parent element, you can use `flex-direction` to switch the container to be either a `row` or a `column`.

We also switch the body between `row` and `column`.

Flex into a Row or a Column with flex-direction

Chai is a BDD / TDD assertion library for node and the browser that can be delightfully paired with any javascript testing framework.

chai

In this lesson, you will learn how to verify your API server is returning HTTP 400 responses when clients submit incorrect data. Returning HTTP 400 ensures that your clients are notified of the incorrect usage. Testing for them ensures your API returns errors instead of incorrect responses when supplied with incorrect data.

Test for HTTP 400 responses with Mocha and Chai

In this lesson, we will use Chai's request method to test our Node application's API responses.
By the end of this lesson, you will know how to:
- install the prerequisites to use mocha and chai in your application
- test for HTTP status response codes
- test for a string of text on a page
- test for a json response and validate the properties of the object
- write tests that not only verify the response of your application, but the behavior as well


Test Node RESTful API with Mocha and Chai

URLs often reflect some bit of data that the page should load. This lesson walks you through adding a custom URL Param to the router then forwarding that Param to load data onto the page.

Load Data from URL Params in Vue.js and Nuxt.js

As you create more and more routes, the paths become difficult to manage and concatenate the parts together as just a giant string. Using named routes allows you to reference the route by a simple string then pass in the params as an object. This lesson covers configuring named routes in Nuxt.js in the `nuxt.config.js` and the passing the named route to a `router-link`.

Configure Named Routes in Vue.js and Nuxt.js

Sometimes the `pages/` directory structure doesn't meet your needs, so you'll need to customize your routes manually. Using the nuxt config and "hidden pages" you can map routes to view components without getting in the way of the default pages routing.

Add Custom Routes for Hidden Pages with Vue.js and Nuxt.js

Nuxt.js allows you to return a `Promise` from your `data` function so that you can asynchronously resolve data before displaying the page. This allows the server to fetch the data and render the page once it's ready.

Preload Data using Promises with Vue.js and Nuxt.js

Nuxt.js enables you to easily create layout and navigation by replacing the default App.vue template with your own `app.vue` layout in a `layouts` directory. Then you simply surround your content (the `<nuxt>` instance) with your navigation and/or layout and you're ready to go.

Create Vue.js Layout and Navigation with Nuxt.js


[Shadcn](https://ui.shadcn.com/docs) is a popular component library that allows you to install components into your codebase.

This lesson will show you how to install the [Table component](https://ui.shadcn.com/docs/components/table) and use that presentational component with [Tanstack table](https://tanstack.com/table/latest).


Create a Table Component with Shadcn and Tanstack Table

Build a dynamic table component in React using shadcn component library and tanstack react table.

TypeScript's satisfies operator finally clicked for me when I realized it's almost always used for specific implementations of configuration objects. So this lesson walks you through the naive approaches I've taken before and how to solve them using the satisfies operator. After this, satisfies will be another tool in your belt in TypeScript. To clean up all the TypeScript code you have around configuration.

TypeScript's "satisfies" for Configuration

Windsurf and Cursor are both able to take an image and then use an agent to build out what it sees in that image. This lesson is going to compare Windsurf and Cursor by uploading the same image to both and giving them the same prompt. Comparing not only the results, but also the steps that they take to get there. We'll also try uploading additional images throughout the process to see what they do as far as revising along the way and improving the site as they go along. 

Windsurf Cascade vs. Cursor Composer Agent: Build a Site from an Image

In this lesson, you'll discover how to style View Transitions using CSS pseudo-selectors to create custom animation effects. We'll transform the default cross-fade into a smooth slide transition by targeting the ::view-transition-old and ::view-transition-new pseudo-elements. You'll learn how these powerful selectors give you precise control over your transition animations, allowing you to create more engaging and personalized user experiences with just a few lines of CSS.

Customize View Transitions with CSS Using view-transition-old and view-transition-new

In this lesson, you'll learn how to implement smooth state transitions in your web applications using the browser's built-in View Transitions API. We'll create a simple example that demonstrates how to animate between different text states with just a few lines of code - no external libraries required. This powerful native API makes it easy to add professional-looking transitions to your user interface, enhancing the user experience with minimal effort.

Create Smooth UI Transitions with the Native View Transitions API

I've been using Cursor for a very long time and their "Agent" feature in Composer is fairly new, so I'm still getting used to it. But since Windsurf recently got onto the stage with their Cascade agent, they've slowly been gaining the mind share on the UX for coding agents. I decided to put them to the test by putting Windsurf and Cursor on the exact same screen side by side trying to accomplish the same task and to see which workflow I would prefer. I've been a diehard Cursor user for over a year now, so it's going to take a lot for me to switch to a different IDE. But I just have to say, even from this simple demo, Windsurf is looking pretty nice.

This lesson is just going to walk through creating a CLI using both tools to print out inspirational quotes and to explore how they approach the step-by-step of installing packages and running commands and setting up all the files we need to get this running.

Windsurf Cascade vs. Cursor Composer Agent Side-by-Side Comparison

This TypeScript tutorial explains how to use generics, allowing for different types to be passed as arguments. It discusses the use of shorthand syntax in generics and illustrates with examples. This method is useful for library creation, providing type safety and control to the user.

```typescript
interface PhotoMetadata<T> {
  title: string;
  takenAt: Date;
  customData: T;
}

// Function that processes a photo with custom metadata
function processPhoto<T>(photo: PhotoMetadata<T>): {
  processedTitle: string;
  daysSinceCapture: number;
  customDataSummary: T;
} {
  const today = new Date();
  const daysSinceCapture = Math.floor(
    (today.getTime() - photo.takenAt.getTime()) / (1000 * 60 * 60 * 24)
  );

  return {
    processedTitle: photo.title.toUpperCase(),
    daysSinceCapture,
    customDataSummary: photo.customData
  };
}

// Example usage with different custom data shapes
type CameraSettings = {
  iso: number;
  aperture: string;
  shutterSpeed: string;
}

type LocationData = {
  latitude: number;
  longitude: number;
  locationName: string;
}

// Using with camera settings
const photoWithCamera: PhotoMetadata<CameraSettings> = {
  title: "Sunset at beach",
  takenAt: new Date('2024-01-15'),
  customData: {
    iso: 100,
    aperture: "f/2.8",
    shutterSpeed: "1/1000"
  }
};

// Using with location data
const photoWithLocation: PhotoMetadata<LocationData> = {
  title: "Mountain vista",
  takenAt: new Date('2024-02-01'),
  customData: {
    latitude: 45.5231,
    longitude: -122.6765,
    locationName: "Mount Hood"
  }
};

const processedCameraPhoto = processPhoto(photoWithCamera);
const processedLocationPhoto = processPhoto(photoWithLocation);

processedCameraPhoto.customDataSummary.iso
processedLocationPhoto.customDataSummary.longitude

```

Basic Explanation of Typescript Generics

A very basic explanation of generic function arguments

I've been using Cursor as my primary editor for over a year now, but recently I've heard wonderful things about Windsurf AI Agent features. I decided to record myself building out something I've always wanted to make, but never made the time for.

In this lesson, I demonstrate how to leverage Windsurf's powerful agent process to create a fun word-guessing game inspired by Heads Up. Watch as I build an interactive application featuring category selection and word navigation, complete with data hosting on GitHub Gists and deployment to GitHub Pages - all in under 30 minutes (before editing the lesson down to 12 minutes)!

What makes this project particularly exciting is how Windsurf eliminates the typical friction points of development. While this game was always on my project wishlist, the overhead of setup, configuration, and deployment made it hard to justify the time investment. Windsurf's agent process handles all these pain points seamlessly, from managing URLs to orchestrating deployment.

This lesson perfectly showcases how AI agents can help developers bring their backlog of project ideas to life, transforming what would typically be time-consuming tasks into efficient, enjoyable development experiences.

Build a Word Game with Windsurf's Cascade AI Agent



Discover how to harness the power of Cursor IDE's Composer Agent feature to optimize your code. In this lesson, you'll witness an AI agent doing all the work to generate test suites, implement performance benchmarks, and create optimized function variations - all without writing a single line of code. You'll learn how to validate performance improvements through data-driven benchmarking, ensuring that optimizations are backed by concrete metrics rather than speculation. This hands-on demonstration showcases a groundbreaking approach to automated function development that combines the precision of test-driven development with the efficiency of AI-powered optimization.


Agent-Driven Development in Cursor: Testing, Benchmarking, and Optimizing Functions

This course is aimed for using `zod` effectively in projects based on TypeScript (both browser and node.js). The benefits you gain with this course is not just simply coding, but also understanding when/why/how should you perform runtime validation.

`zod` is the missing piece to TypeScript's capabilities, which can guarantee type-safety only in compile-time.

`zod` can be used whenever the compiler cannot guarantee what happens in runtime. And... it's a very frequent usecase, such as HTTP calls, websockets, etc.

In this course you get quickly up and running by:
1. using `zod` with primitives and objects
2. adapting `zod` quickly to existing projects thanks to automatic generators
3. changing the strategy frm type-first to schema-first
4. using error-throwing `parse` or non-error-throwing `safeParse` basing on your needs
5. applying `zod` to the most common usecase - validating API responses
6. handling errors the most convenient way (out of many!)

Take advantage of runtime validation with `zod`. Take advantage of the detailed lessons in this course 🔥

Search

Search Results