Learn Cypress, Ethereum and Recompose

Vue (pronounced /vjuː/, like view) is a progressive framework for building user interfaces. Unlike other monolithic frameworks, Vue is designed from the ground up to be incrementally adoptable. The core library is focused on the view layer only, and is very easy to pick up and integrate with other libraries or existing projects. On the other hand, Vue is also perfectly capable of powering sophisticated Single-Page Applications when used in combination with modern tooling and supporting libraries.

Some components render differently based on the route they are rendered on. To use router within component tests, it is best to define its default values in `cy.mount()` function. Since we can customize this in any way we’d like, we can create a custom `path` attribute where we can pass our own routes and test our component behavior against them.

Test a Component Rendering Within Different Router Locations in Cypress Component Test

Every component test that uses Pinia needs to have Pinia imported and initialized. Instead of doing this separately for each test you can customize your `cy.mount()` command to automatically use a default store. You can further then customize it to use your own store in case you want to change its state.

Rewrite Cypress mount() Command to Provide a Default Store to all Components

Instead of calling an action function to change the state, we can choose to change it directly by importing the attributes from our store. In order to not loose reactivity while destructuring properties we can use `storeToRefs()` function.

Mutate Application State Properties Directly with Pinia’s storeToRefs()

Fast, easy and reliable testing for anything that runs in a browser.

cypress

When component uses a state management tool like Pinia, it needs to be defined within the test. To use Pinia inside the Cypress component test, we need to create a Pinia instance and pass it into our store. For changing the state we can call our actions directly from within our test and assert different attributes of the component with Cypress commands

Call Pinia Store Actions From Within a Cypress Component Test

`emit()` function enables components to communicate with one another. While this communication is a good candidate for end to end test, we can also test this in isolation within component. To do this, we’ll use `cy.spy()` function that will watch for the defined function call. Using this, we can confirm that our emitted event was actually invoked.

Use Cypress cy.spy() Function to Test a Vue 3 Component’s Emitted Events

By passing a `slots` option to our `cy.mount()` function, we can define content to be rendered inside our current component. We can use default or named components and eve use Vue’s `h()` function to create element and pass components with desired properties.

Render a Vue 3 Component with <slot /> and Test its Content Properties

Some components can have properties passed into them, For these, we can use an options parameter in our `cy.mount()` function and pass `props` attribute which will define the properties we want to pass into our component. This way we can test whether different properties correctly render out in our component.

Pass Properties Into a Vue 3 Component Within a Cypress Test

Importing styles is going to be essential for all of our components to render properly. We will do this similarly as we do in our application - at top level. `component.ts` file is the proper file for this, as this is the one that gets loaded before running our specs. Importing our `index.css` file here will make all of our components render with the correct styles.

Setup Global CSS Properties for Cypress Component Tests

To create our first test, you’ll create a spec file that pairs with the component. Usual naming convention is using `filename.cy.ts` (or .js), but this can be easily set up in `cypres.config.ts` file. After you create the spec file, you can mount the component by importing it and using cy.mount() command inside an `it()` block. This will render the component inside Cypress app, but will not load all the dependencies that the component needs, like css styles. These need to be imported into the spec file manually. Since we are running our component in a browser and inside a Cypress app, we can interact with it using common Cypress commands.

Mount and Test a Vue 3 Component in Cypress

To start with component testing in Cypress you need to open Cypress and go through setup wizard that will help you out with your first steps. It will take you through a couple of steps, where you’ll install dependencies and create important configuration. Most of this is done for you, but you can customize anything. In our application, we will be working with Vue 3 framework with Vite bundler.

Setup Vue 3 Component Testing in Cypress

Ethereum is a decentralized, open-source blockchain with smart contract functionality. 

ethereum

Welcome to Noah's course on Introduction to Smart Contracts with Ethereum and Solidity. 

Introduction to Introduction to Smart Contracts with Ethereum and Solidity

Web3 is a paradigm shift in how applications are interacted with, ran, and built. 

It’s not just a Pump-and-Dump scheme on cryptocurrencies or Bored Ape NFT profile pictures you can put on Twitter.

A fundamental tenet of Web3 is bringing ownership back to the user. You no longer have to trust that your data is being properly handled on someone else’s server (although, currently Web3 ecosystem mainly depends on centralized infrastructure such as GitHub).  

This ownership is achieved through blockchain, cryptocurrencies, NFTs, and smart contracts.

A great example of this type of ownership is through how you exchange money in Web3. There is no intermediary like Stripe, or PayPal to process your transactions. You can even build your own smart contracts that receive crypto (e.g. Ethereum or ‘eth’ for short) and then process that eth how you’d like.

Building this type of smart contract is exactly what Matías is going to show you how to do right now.

Matías builds out a Web3 application that allows you to receive tips in the form of eth in a tip jar on your website. This means your application will be backed by a smart contract that’s accepts eth, stores data, and emits Solidity events.

The frontend application uses SvelteKit which you’ll see how easy it is to get up and be productive with in minutes. A huge benefit here is that the JavaScript you write is just that, JavaScript. You’ll be able to take what you learn and implement it into any framework of your choosing.

While you build this application you will learn how to:

- Write a smart contract using Solidity language
- Test the smart contract using just JavaScript through the waffle framework
- Communicate and interact with the smart contract using ethers.js in a SvelteKit application
- Deploy your smart contract to make it public and accessible to anyone

Solidity is an object-oriented, high-level language for implementing smart contracts.

solidity

Full Stack Web3 and Blockchain Development on Ethereum with SvelteKit

There are several Ethereum test networks like Ropsten, Rinkeby and Kovan that you can use to deploy your contract to have it publicly available without having to use the mainnet and real ETH.
In this course you'll deploy to Rinkeby netwok (but, the process is the same for the other networks).

The first step will be update your Metamask Wallet to connect to the Rinkeby network.

Next, you'll need some test/fake Ethere to use for testing the Dapp in the network, for that you'll need to use a [faucet like this one](https://www.rinkebyfaucet.com/). Just visit that faucet and add your wallet address.

You will also deploy your web application to vercel to see your project live on the internet!

Deploy your Smart Contract to Goerli Test Network and App to Vercel

The magical disappearing UI framework

 - The web's JavaScript bloat crisis, solved. Svelte turns your templates into tiny, framework-less vanilla JavaScript.
 - Simple and familiar. Build apps out of composable, easy-to-write blocks using languages you already know.
 - Super fast, rock solid. Compile-time static analysis ensures the browser does no more work than it needs to.

svelte

Now that we have an application that is accepting tips to the smart contract that was defined, we need to be able to withdraw the funds that are sent to the contract. The smart contract function for this is already defined so we will just need to call the function from the front end.

To do this we will create a new route to display the contract information. We will then check if the current user is the contract owner and if so allow that user to withdraw the contract funds by clicking a button that we wire up to call the withdraw function from the smart contract.

## Important

SvelteKit is still in beta. Expect bugs! Read more here, and track progress towards 1.0 here. 

This lesson was recorded before the latest breaking changes, the content is still valid but it sometimes references a file that does not exists anymore.

Now: 
`src/routes/index.svelte` is called `src/routes/+page.svelte`

`src/routes/__layout.svelte` is called `src/routes/+layout.svelte`


Everything else is 100% valid. This particular content will be updated when Sveltekit reaches 1.0.0 stable.

Withdraw eth from a Smart Contract in a Svelte Application

It is time to interact with the contract, let's send some eth!

For this you'll need a form that is rendered only when the wallet is connected.
This form use the `sendTip` function and gather some required information. On submit, it will read the `sendingTip` loading state variable and disable or enable the button.

## Important

SvelteKit is still in beta. Expect bugs! Read more here, and track progress towards 1.0 here. 

This lesson was recorded before the latest breaking changes, the content is still valid but it sometimes references a file that does not exists anymore.

Now: 
`src/routes/index.svelte` is called `src/routes/+page.svelte`

`src/routes/__layout.svelte` is called `src/routes/+layout.svelte`


Everything else is 100% valid. This particular content will be updated when Sveltekit reaches 1.0.0 stable.

Create a Form in Svelte and Send a Tip to an Solidity Smart Contract

Now is time to setup the client to talk with the contract, for that you will need to store and access the contract ABI (this is a file generated by the contract compilation) as well as use ethers to set up a connection to the contract. 

Once set up is complete, we will listen to any tip events that come in from the contract and display tip information in the application.

## Important

SvelteKit is still in beta. Expect bugs! Read more here, and track progress towards 1.0 here. 

This lesson was recorded before the latest breaking changes, the content is still valid but it sometimes references a file that does not exists anymore.

Now: 
`src/routes/index.svelte` is called `src/routes/+page.svelte`

`src/routes/__layout.svelte` is called `src/routes/+layout.svelte`


Everything else is 100% valid. This particular content will be updated when Sveltekit reaches 1.0.0 stable.

Interact with a Solidity Smart Contract Using Ethers and the Contract ABI in SvetleKit

Now the UI is capable to connect to the Ethereum network by using the wallet, but we need two more things to continue.

1. Avoid re-connecting every time the browser is refreshed
2. Get more information about the user and the network.

For the first, let's run a little function every time the component is mounted.

Then, let's read and display some more information:

- The user balance
- The network that the user is currently connected

## Important

SvelteKit is still in beta. Expect bugs! Read more here, and track progress towards 1.0 here. 

This lesson was recorded before the latest breaking changes, the content is still valid but it sometimes references a file that does not exists anymore.

Now: 
`src/routes/index.svelte` is called `src/routes/+page.svelte`

`src/routes/__layout.svelte` is called `src/routes/+layout.svelte`


Everything else is 100% valid. This particular content will be updated when Sveltekit reaches 1.0.0 stable.


Retrieve Ethereum Network and Account information on Mount and Display it in Svelte

The first step in this part of the journey, will be to setup a simple UI that allow you to connect the current user to the blockchain through it's wallet.

To do this, let's write some code.

Sveltekit applications works by using a file system routing method, meaning that you need to create files under the `src/routes/` folder and those will be then reflected as routes (urls) in your app. Let's keep ti simple and just use the default route here, open `src/routes/index.svelte` and delete the content of it.

You're first step will be create a button that allow the user to "sing-in" to your new dapp and allow the UI to react to that showing a different content if the authorization process was successful.


Connect a Metamask Account to a Svelte Application

Before jumping into the Dapp code you need to setup an Ethereum wallet.
There are bunch of wallet applications and types outher, but for this project we're going to use Metamask.

### What is an ethereum Wallet

A wallet is an application that let's you interact with your Ethereum account. You're wallet is the one that works as a gate between the Dapp and your data, through it the applications can read your balance, send transactions, etc.

You can swap wallet providers at any time or manage multiple accounts in one application. This is because the wallet are non-custodial, meaning that they don't hold your assets, you do.

Just to set some concepts down:

- An Ethereum account is an "entity" that can send transactions and store some assets, it "lives" inside the blockchain.
- The accout have an address (like your profile URL of some social app or your email address) that can be used to send or receive funds.
- A wallt is an application that allow you to interact with the Ethereum account.

There are different types of Wallets:

- Hardware wallets that hold your crypto assets offline - The most secure of all
- Mobile apps, like Argent.
- Web wallets, that let you interact through the browser: Like Metamask.
- Desktp apps

Set up a Metamask Wallet with your local Ethereum Network

Now you need a way to keep a local network alive, deploy the smart contract there and then interact with it. You can think on this like a local web server. When you develop an API you have a local server running it so the client application can talk to it so you can develop and test, this is the same idea.

Head over to your terminal and run tthe following command.

```bash
$ npm run hardhat node
```

This will ramp up a local ethreum network using hardhat and will show in the console a set of accounts and private keys that can be used for testing pruposes.

These are 20 test accounts and addresses created for your. Each account is also rich! are loaded with 10000 ETH. (fake eth btw).

Right now this is just an empty blockchain. There are no blocks nor smart contracts on it. But you want to create a new block and put the smart contract that you just created there, for that you need to create a little script that will use ethers.js power to compile and deploy.

Deploy a Solidity Smart Contract with Hardhat to a Local Ethereum Network

To reduce the amount of gas used, we will create a withdraw function that lets the owner of the contract withdraw funds that have been added when they want rather than withdraw with every transaction.

Your smart contract is ready to be used, since you have confidence in the code after testing it.

But there are a few things that you can add to improve the behavior and security of it.

Let's start by adding events.

Similar to any other programming language Events in solidity are a way to inform the calling application about the current state of the contract. Like notifying the javascript client about a change made to the contract allowing the client application to react to it.

Events are defined within the contract as a global and are called from inside a function. To declare an event you use the `event` keyword, followed by an identifier and the parameter list. The values passed to the parameters are then used to log the information that is saved as part of the transaction inside the block.

To send the event you'll use the `emit` keyword from anywhere inside the contract by passing the name of the event and the corresponding parameters.

For this contract you want to let the client application to know when a tip was successfully sent. To do that you'll create a new event named `NewTip` like this

```javascript
event NewTip(address indexed from, string message, string name, uint256 amount);
```

It will accept an address to identify who sent the tip, the message of the tip and also the name and the amount of eth sent,

And then, it will be emitted from the `sendTip` function

```javascript
// send the event
emit NewTip(msg.sender, _message, _name, msg.value);
```

This event will use the same parameters that the rest of the `sendTip` operation.

- `msg.sender` to get the address of who sent the tip
- `_message` the string with the message sent
- `_name` the name of the sender
- `msg.value` the amount of `eth` sent.

Add eth Withdraw Functionality in a Smart Contract and Emit Solidity Events

Creating powerful and context-aware tools for Cursor IDE becomes straightforward when leveraging information directly from your current project. In this lesson, you'll learn how to build a custom MCP (model context protocol) tool that intelligently requests essential details—such as the current project path and conversation summaries—from your Cursor project.

Workflow demonstrated in this lesson:

- Define MCP tool parameters to request specific project details.
- Pass project path and conversation summaries into your MCP tool.
- Automatically write or update files within your current project using these parameters.

Key benefits:

- Automate tasks with precision based on your active project's context.
- Simplify interactions by creating AI-driven CLI commands tailored to your needs.
- Open endless possibilities for integrating external APIs and advanced automation.

Through this practical demonstration, you'll gain a versatile technique for enhancing your development workflow in Cursor IDE.

[https://github.com/johnlindquist/mcp-cursor-tool-starter](https://github.com/johnlindquist/mcp-cursor-tool-starter)

John Lindquist

Build MCP Tools Using Project Context for Custom Cursor IDE Automation

Setting up custom MCP (Machine Command Protocol) servers in Cursor can involve tedious steps, such as configuring node paths or referencing additional commands. This lesson shows how to streamline this process by bundling your MCP server directly into a standalone executable.

Workflow demonstrated in this lesson:

- Use a simple MCP server project starter.
- Run a single bundling command to create an executable.
- Right-click the generated executable, copy its full path, and add that directly to your Cursor settings.

Key benefits:

- Eliminates the need for complex node path configurations.
- Simplifies the setup and integration of custom MCP servers into Cursor.
- Makes the server executable instantly accessible within your Cursor environment.

By following this streamlined approach, you can quickly and easily integrate custom MCP servers into Cursor, making your development workflow cleaner and more efficient.

[https://github.com/johnlindquist/mcp-cursor-tool-starter]()

Easy MCP Server Setup in Cursor IDE with Bundled Executables

TanStack Router is the foundation for TanStack Start, which is gaining significant attention due to its innovative approach to application development.

This course focuses on getting effective TanStack Router, a modern and scalable routing solution for React applications. You will learn how to:
- set up and scaffold new applications,
- use file-based routing
- create nested routes
- manage dynamic route parameters and more.

The course covers advanced features like route loaders, caching strategies, and lifecycle hooks, which are crucial for enhancing application performance and user experience.

By understanding TanStack Router, you can build more efficient, type-safe, and maintainable applications, leveraging its integration with data fetching libraries like TanStack Query.

This knowledge is essential for developers looking to improve their routing skills and stay ahead in the field.

Tomasz Ducin

Up and Running with Tanstack Router and React

Learn TanStack Router for React: set up apps, use file-based routing, manage routes, and boost app performance.


In this lesson, we explore how TanStack Router integrates with the [native browser history API](https://developer.mozilla.org/en-US/docs/Web/API/History) to manage navigation.

As we navigate through different routes, the URL changes are stored in the browser's history, allowing users to use the forward and backward buttons to traverse their navigation history.

This functionality also **enables permalinks**, meaning users can copy and paste URLs to access specific routes directly.

Additionally, we learn how to programmatically interact with the history object to move forward or backward through the navigation stack, enhancing the user experience by providing full control over navigation actions.

This compatibility with the native history API ensures that TanStack Router applications behave similarly to traditional websites, offering a seamless and intuitive user experience.

Browse History in Tanstack Router

Browse history in TanStack React Router using the native history API for seamless navigation

In this lesson, we explore how to hook into TanStack Router's lifecycle hooks to execute custom logic during route changes.

The hooks we'll look into are: `onEnter`, `onStay`, and `onLeave`, which are triggered when entering, staying within, or leaving a route, respectively.

All hooks receive a detailed match parameter, providing information about the route's path, ID, and tons of other details.

This allows for the implementation of features like animations or logging when navigating between routes.

We also learn how to use these hooks to track and manage state changes as users interact with the application, making it easier to implement complex behaviors based on route transitions.

Hook into Route Lifecycle Hooks in Tanstack Router

Hook into TanStack React Router's lifecycle hooks for custom route logic and animations.

In this lesson, we learn how to handle not found errors in TanStack Router by using the `notFoundComponent` at both nested and global levels.

To trigger the display of a `notFoundComponent`, we must throw a specific error using the `notFound` function within a loader or other lifecycle method of a route. This approach allows us to provide custom error messages for specific routes or globally across the application.

We explore how to define a notFoundComponent within a specific route's configuration and how to set a `defaultNotFoundComponent` at the router global level, which applies to all routes unless overridden locally. This flexibility ensures that users receive meaningful feedback when encountering non-existent routes.

Provide NotFoundComponent at Nested Route or Global Level in Tanstack Router

Handle notFound errors in TanStack Router with notFoundComponent at nested or global levels.



In this lesson, we learn how to access dynamic route parameters using the `useParams` hook in TanStack Router.

When used with a specific `Route` object, `useParams` provides type-safe access to route parameters, ensuring that TypeScript knows the exact types of these parameters.

This approach eliminates the possibility of undefined/optional values, making it safer for accessing parameters like `employeeId`.

However, when using `useParams` globally without specifying a route, it requires an options object with `{ strict: false }`, which reduces type safety.

In this case, the hook can access parameters from any route in the application, but it does not guarantee their existence or type. This flexibility allows components to be reused across different routes, but it requires careful handling of potential errors.



Access Dynamic Route Parameters with useParams in Tanstack Router

Access dynamic route parameters with useParams in TanStack React Router for type-safe routing.

In this lesson, we learn how to reorganize file-based routes in TanStack Router to accommodate nested routing structures.

We explore how to create additional nested routes by converting files into directories, allowing for further nesting.

For example, to create a nested route like `/employees/$employeeId/edit`, we can create a **directory** (!) named `$employeeId` and place an `index.tsx` file inside it to define the route component for this nested route.

This approach provides flexibility in organizing files while maintaining the convention that file names and locations align with route paths. We also see how to adapt existing components and loaders to work with these reorganized routes, enabling features like edit forms or delete actions (or whatever) within nested routes.


Reorganize File-Based Routes in Tanstack Router

Reorganize file-based routes in TanStack Router for flexible nested routing.



In this lesson, we learn how to parametrize the loader for a nested route in TanStack Router.

We focus on a nested route like `/employees/$employeeId`, where the `$employeeId` is a **dynamic parameter**.

To fetch data for this route, we use a `loader` function that accesses the `$employeeId` parameter. This is achieved by using the params object available in the `loader` function, which contains the dynamic segments of the URL. We then use this parameter to call a function like `getEmployeeById`, which fetches specific employee details from an API.

We highlights that TanStack Router **automatically infers types** for these parameters, ensuring type safety for nested routes.

Parametrize Route Loader for Nested Route in Tanstack Router

Parametrize nested route loaders in TanStack Router using path parameters

In this lesson, we learn how to create nested routes and outlets in TanStack Router using file-based routing.

We start by creating a new `employees` directory and files to represent nested routes, such as `/employees/$employeeId`. The `$` symbol is used to denote dynamic parameters.

We then use the `<Link>` component from TanStack Router to create links to these nested routes, passing necessary parameters.

To render the nested content, we use the `<Outlet>` component (nested), which automatically renders child routes. This approach allows us to dynamically display stuff under a nested route.

All the time, the TanStack Router generator automatically updates the route tree based on file changes - our routing configuration remains consistent 🔥



Create Nested Route and Nested Outlets in Tanstack Router

Create nested routes and outlets in TanStack Router using file-based routing

Search

Search Results