Learn Cypress, Npm and Xstate

Vue (pronounced /vjuː/, like view) is a progressive framework for building user interfaces. Unlike other monolithic frameworks, Vue is designed from the ground up to be incrementally adoptable. The core library is focused on the view layer only, and is very easy to pick up and integrate with other libraries or existing projects. On the other hand, Vue is also perfectly capable of powering sophisticated Single-Page Applications when used in combination with modern tooling and supporting libraries.

Some components render differently based on the route they are rendered on. To use router within component tests, it is best to define its default values in `cy.mount()` function. Since we can customize this in any way we’d like, we can create a custom `path` attribute where we can pass our own routes and test our component behavior against them.

Test a Component Rendering Within Different Router Locations in Cypress Component Test

Every component test that uses Pinia needs to have Pinia imported and initialized. Instead of doing this separately for each test you can customize your `cy.mount()` command to automatically use a default store. You can further then customize it to use your own store in case you want to change its state.

Rewrite Cypress mount() Command to Provide a Default Store to all Components

Instead of calling an action function to change the state, we can choose to change it directly by importing the attributes from our store. In order to not loose reactivity while destructuring properties we can use `storeToRefs()` function.

Mutate Application State Properties Directly with Pinia’s storeToRefs()

Fast, easy and reliable testing for anything that runs in a browser.

cypress

When component uses a state management tool like Pinia, it needs to be defined within the test. To use Pinia inside the Cypress component test, we need to create a Pinia instance and pass it into our store. For changing the state we can call our actions directly from within our test and assert different attributes of the component with Cypress commands

Call Pinia Store Actions From Within a Cypress Component Test

`emit()` function enables components to communicate with one another. While this communication is a good candidate for end to end test, we can also test this in isolation within component. To do this, we’ll use `cy.spy()` function that will watch for the defined function call. Using this, we can confirm that our emitted event was actually invoked.

Use Cypress cy.spy() Function to Test a Vue 3 Component’s Emitted Events

By passing a `slots` option to our `cy.mount()` function, we can define content to be rendered inside our current component. We can use default or named components and eve use Vue’s `h()` function to create element and pass components with desired properties.

Render a Vue 3 Component with <slot /> and Test its Content Properties

Some components can have properties passed into them, For these, we can use an options parameter in our `cy.mount()` function and pass `props` attribute which will define the properties we want to pass into our component. This way we can test whether different properties correctly render out in our component.

Pass Properties Into a Vue 3 Component Within a Cypress Test

Importing styles is going to be essential for all of our components to render properly. We will do this similarly as we do in our application - at top level. `component.ts` file is the proper file for this, as this is the one that gets loaded before running our specs. Importing our `index.css` file here will make all of our components render with the correct styles.

Setup Global CSS Properties for Cypress Component Tests

To create our first test, you’ll create a spec file that pairs with the component. Usual naming convention is using `filename.cy.ts` (or .js), but this can be easily set up in `cypres.config.ts` file. After you create the spec file, you can mount the component by importing it and using cy.mount() command inside an `it()` block. This will render the component inside Cypress app, but will not load all the dependencies that the component needs, like css styles. These need to be imported into the spec file manually. Since we are running our component in a browser and inside a Cypress app, we can interact with it using common Cypress commands.

Mount and Test a Vue 3 Component in Cypress

To start with component testing in Cypress you need to open Cypress and go through setup wizard that will help you out with your first steps. It will take you through a couple of steps, where you’ll install dependencies and create important configuration. Most of this is done for you, but you can customize anything. In our application, we will be working with Vue 3 framework with Vite bundler.

Setup Vue 3 Component Testing in Cypress

A Monorepo is where you have multiple projects inside a singular repository.

monorepo

Introduction to Monorepos with NPM Workspaces

npm is the package manager for JavaScript. Find, share, and reuse packages of code from hundreds of thousands of developers — and assemble them in powerful new ways.

Thank you for completing my course!

You’ve learned what monorepos are, how to create them from scratch, how to install different projects inside of it, and how to run different scripts inside of a monorepo. 

So where do you go from here? I suggest creating your own Monorepo project template and publish it on Github. Take a look at Yarn Workspaces, pnpm, Learna, Nx and Turborepo for different monorepo tools. 

I also highly suggest Migrating some of your existing projects to a monorepo. Have a main frontend application that consumes a shared UI library package and a backend service. Another way would be to have a backend service, a mobile application and a frontend application. 

Best of luck and happy coding!

Intro to Monorepos with NPM Workspaces Outro

All of our applications and libraries have `test` and `typecheck` commands already written inside of them. We are able to run both the `test` and `typecheck` commands all at the same time as well. 

This has a downside. They don’t run at the same time, it’s just one after the other. To make them run at the same time, we will implement `concurrently` again.

Running Quality Checks in your Monorepo

We already have a utils package that outputs JavaScript. If we want to use that package inside any of our applications, in our case, blog or dashboard, we would have to install it first.

Share Code Between a Library and Applications Inside a Monorepo

Right now, it is not possible to run all the Dev Scripts across all the packages of the monorepo at the same time, because once we run `npm run dev` with the `-ws` flag, we will run the dev-command in the block first, but that command never ends. It is always watching for changes.

In order to run the `dev` scripts across all the packages in the monorepo, the first thing that we have to do, is to create a dev command for each one of the packages in the root package.json file. Then we can use `concurrently` to change them. We go `concurrently` and we tell it to run the utils, then the blog and then the dashboard scripts.

Run Dev Scripts for All Packages Simultaniously

We can install a dependency inside a monorepo by running npm install, then the name of the dependency, in our case, it’s going to be Lodash. But, we are going to add different flags to that.

If we use the `-w` flag, we would have to specify in what package we want to install Lodash. We will do this for `monorepo/utils`. We could also use the `-ws` flag to install Lodash across all the packages in the monorepo. We can also use `-W` in uppercase to install Lodash in the root of the project.

Install Dependencies for Specific Packages in a Monorepo

To run specific commands inside a monorepo we have to type `npm run` then the name of the command, `build`. We then add the flag `-w` for watch mode and specify which package we want to run the build command. In this case, it’s going to be the `utils` package. 

The full command will look like, `npm run build -2 @monorepo/utils`.

If you want to run all of the commands, you'll need to add the `-ws` flag. 

The full command for running all of our build commands will look like, `npm run build -ws`. 

Run App Specific Commands in a Monorepo

Creating a TypeScript library inside the monorepo is easy if we use tsup. To configure tsup, we have to set up the entry point. In our case, it's going to be the index.ts file inside the src directory.

We will also specify some extra options for tsup such as generating the types and source maps. We can also output different formats. In this case, we want to output an ESM file and a CommonJS file.

Add a TypeScript library to your Monorepo using TSUP

In order to create applications inside our monorepo, we can use different CLI tools like create-next-app or the Vite CLI. We'll install them inside the apps folder. We will create a blog and a dashboard app, one using create-next-app and the other using the Vite CLI.

It is also important to note that the only package-lock.json file that should exist, exists at the root of the project.

Install a Next.js and a Vite.js Applications Into a Monorepo

For this course, we are going to be using NPM Workspaces to configure our monorepo. We will have two workspaces, one for our apps and one for our libraries. We configure those in our package.json.

Configure NPM Workspaces in your Package.json

A monorepo is a group of small projects that can be combined to build bigger projects, or they could just be small projects that doesn't know anything about the other projects.

One great thing about monorepos is that the code is available for everyone at every time. If you are a frontend engineer, and you're working in the blog application and you see that there is a bug in the backend application, you can go and fix it right away.

What are Monorepos

I've been using Cursor for a very long time and their "Agent" feature in Composer is fairly new, so I'm still getting used to it. But since Windsurf recently got onto the stage with their Cascade agent, they've slowly been gaining the mind share on the UX for coding agents. I decided to put them to the test by putting Windsurf and Cursor on the exact same screen side by side trying to accomplish the same task and to see which workflow I would prefer. I've been a diehard Cursor user for over a year now, so it's going to take a lot for me to switch to a different IDE. But I just have to say, even from this simple demo, Windsurf is looking pretty nice.

This lesson is just going to walk through creating a CLI using both tools to print out inspirational quotes and to explore how they approach the step-by-step of installing packages and running commands and setting up all the files we need to get this running.

Windsurf Cascade vs. Cursor Composer Agent Side-by-Side Comparison

This TypeScript tutorial explains how to use generics, allowing for different types to be passed as arguments. It discusses the use of shorthand syntax in generics and illustrates with examples. This method is useful for library creation, providing type safety and control to the user.

```typescript
interface PhotoMetadata<T> {
  title: string;
  takenAt: Date;
  customData: T;
}

// Function that processes a photo with custom metadata
function processPhoto<T>(photo: PhotoMetadata<T>): {
  processedTitle: string;
  daysSinceCapture: number;
  customDataSummary: T;
} {
  const today = new Date();
  const daysSinceCapture = Math.floor(
    (today.getTime() - photo.takenAt.getTime()) / (1000 * 60 * 60 * 24)
  );

  return {
    processedTitle: photo.title.toUpperCase(),
    daysSinceCapture,
    customDataSummary: photo.customData
  };
}

// Example usage with different custom data shapes
type CameraSettings = {
  iso: number;
  aperture: string;
  shutterSpeed: string;
}

type LocationData = {
  latitude: number;
  longitude: number;
  locationName: string;
}

// Using with camera settings
const photoWithCamera: PhotoMetadata<CameraSettings> = {
  title: "Sunset at beach",
  takenAt: new Date('2024-01-15'),
  customData: {
    iso: 100,
    aperture: "f/2.8",
    shutterSpeed: "1/1000"
  }
};

// Using with location data
const photoWithLocation: PhotoMetadata<LocationData> = {
  title: "Mountain vista",
  takenAt: new Date('2024-02-01'),
  customData: {
    latitude: 45.5231,
    longitude: -122.6765,
    locationName: "Mount Hood"
  }
};

const processedCameraPhoto = processPhoto(photoWithCamera);
const processedLocationPhoto = processPhoto(photoWithLocation);

processedCameraPhoto.customDataSummary.iso
processedLocationPhoto.customDataSummary.longitude

```

Basic Explanation of Typescript Generics

A very basic explanation of generic function arguments

I've been using Cursor as my primary editor for over a year now, but recently I've heard wonderful things about Windsurf AI Agent features. I decided to record myself building out something I've always wanted to make, but never made the time for.

In this lesson, I demonstrate how to leverage Windsurf's powerful agent process to create a fun word-guessing game inspired by Heads Up. Watch as I build an interactive application featuring category selection and word navigation, complete with data hosting on GitHub Gists and deployment to GitHub Pages - all in under 30 minutes (before editing the lesson down to 12 minutes)!

What makes this project particularly exciting is how Windsurf eliminates the typical friction points of development. While this game was always on my project wishlist, the overhead of setup, configuration, and deployment made it hard to justify the time investment. Windsurf's agent process handles all these pain points seamlessly, from managing URLs to orchestrating deployment.

This lesson perfectly showcases how AI agents can help developers bring their backlog of project ideas to life, transforming what would typically be time-consuming tasks into efficient, enjoyable development experiences.

Build a Word Game with Windsurf's Cascade AI Agent



Discover how to harness the power of Cursor IDE's Composer Agent feature to optimize your code. In this lesson, you'll witness an AI agent doing all the work to generate test suites, implement performance benchmarks, and create optimized function variations - all without writing a single line of code. You'll learn how to validate performance improvements through data-driven benchmarking, ensuring that optimizations are backed by concrete metrics rather than speculation. This hands-on demonstration showcases a groundbreaking approach to automated function development that combines the precision of test-driven development with the efficiency of AI-powered optimization.


Agent-Driven Development in Cursor: Testing, Benchmarking, and Optimizing Functions

This course is aimed for using `zod` effectively in projects based on TypeScript (both browser and node.js). The benefits you gain with this course is not just simply coding, but also understanding when/why/how should you perform runtime validation.

`zod` is the missing piece to TypeScript's capabilities, which can guarantee type-safety only in compile-time.

`zod` can be used whenever the compiler cannot guarantee what happens in runtime. And... it's a very frequent usecase, such as HTTP calls, websockets, etc.

In this course you get quickly up and running by:
1. using `zod` with primitives and objects
2. adapting `zod` quickly to existing projects thanks to automatic generators
3. changing the strategy frm type-first to schema-first
4. using error-throwing `parse` or non-error-throwing `safeParse` basing on your needs
5. applying `zod` to the most common usecase - validating API responses
6. handling errors the most convenient way (out of many!)

Take advantage of runtime validation with `zod`. Take advantage of the detailed lessons in this course 🔥

Effective Runtime Type Checks with Zod


Cursor can now automatically run commands in the terminal and walk step-by-step towards building out your entire project. You give it a goal, then it will suggest the commands you need to run and the files that you need to create and you can work with it to achieve what you're building. This lesson does a quick walkthough of using a Cursor Agent to build a project from scratch and guide it along the way. Cursor Agents definitely feel like a sneak peek at the future of programming!

Cursor Agents Initial Impressions - Allow an AI to Build Your Entire Project

Mock Service Worker is an API mocking library that allows you to write client-agnostic mocks and reuse them across any frameworks, tools, and environments.



Mocking WebSocket APIs with Mock Service Worker


While using anonymous functions might seem convenient, they can create difficulties when trying to identify performance bottlenecks during profiling. This lesson will demonstrate how named functions make it easier to pinpoint and address performance issues, ultimately leading to more efficient and debuggable code. Learning this practice will greatly improve your ability to locate and fix performance issues in complex projects.

Always Name Functions in JavaScript


When attempting to load the same module twice in JavaScript you'll hit a cache and code won't re-run. In scenarios where you actually do want to have state in your modules, you'll have to use a cache-busting technique by passing a query parameter to a dynamic import. This lesson walks through how to add a query parameter, how to add the appropriate types for loading dynamic modules in TypeScript, and when these techniques are valuable.

Import the Same JavaScript Module Multiple Times with Cache Busting



The include keyword in GitHub Actions empowers you to add custom variables to your matrix strategy, providing flexibility beyond standard configurations. In this video, we'll explore how include allows you to define specific combinations of variables, enhancing control over your workflow runs. You'll see how this feature enables you to tailor jobs for unique environments or scenarios not covered by the default matrix options. By leveraging include, you can efficiently manage complex build processes with greater precision. This technique helps you streamline your CI/CD pipeline, making it more adaptable to your project's evolving needs.

Search

Search Results