Learn Cypress, Xstate and Yarn

Vue (pronounced /vjuː/, like view) is a progressive framework for building user interfaces. Unlike other monolithic frameworks, Vue is designed from the ground up to be incrementally adoptable. The core library is focused on the view layer only, and is very easy to pick up and integrate with other libraries or existing projects. On the other hand, Vue is also perfectly capable of powering sophisticated Single-Page Applications when used in combination with modern tooling and supporting libraries.

Some components render differently based on the route they are rendered on. To use router within component tests, it is best to define its default values in `cy.mount()` function. Since we can customize this in any way we’d like, we can create a custom `path` attribute where we can pass our own routes and test our component behavior against them.

Test a Component Rendering Within Different Router Locations in Cypress Component Test

Every component test that uses Pinia needs to have Pinia imported and initialized. Instead of doing this separately for each test you can customize your `cy.mount()` command to automatically use a default store. You can further then customize it to use your own store in case you want to change its state.

Rewrite Cypress mount() Command to Provide a Default Store to all Components

Instead of calling an action function to change the state, we can choose to change it directly by importing the attributes from our store. In order to not loose reactivity while destructuring properties we can use `storeToRefs()` function.

Mutate Application State Properties Directly with Pinia’s storeToRefs()

Fast, easy and reliable testing for anything that runs in a browser.

cypress

When component uses a state management tool like Pinia, it needs to be defined within the test. To use Pinia inside the Cypress component test, we need to create a Pinia instance and pass it into our store. For changing the state we can call our actions directly from within our test and assert different attributes of the component with Cypress commands

Call Pinia Store Actions From Within a Cypress Component Test

`emit()` function enables components to communicate with one another. While this communication is a good candidate for end to end test, we can also test this in isolation within component. To do this, we’ll use `cy.spy()` function that will watch for the defined function call. Using this, we can confirm that our emitted event was actually invoked.

Use Cypress cy.spy() Function to Test a Vue 3 Component’s Emitted Events

By passing a `slots` option to our `cy.mount()` function, we can define content to be rendered inside our current component. We can use default or named components and eve use Vue’s `h()` function to create element and pass components with desired properties.

Render a Vue 3 Component with <slot /> and Test its Content Properties

Some components can have properties passed into them, For these, we can use an options parameter in our `cy.mount()` function and pass `props` attribute which will define the properties we want to pass into our component. This way we can test whether different properties correctly render out in our component.

Pass Properties Into a Vue 3 Component Within a Cypress Test

Importing styles is going to be essential for all of our components to render properly. We will do this similarly as we do in our application - at top level. `component.ts` file is the proper file for this, as this is the one that gets loaded before running our specs. Importing our `index.css` file here will make all of our components render with the correct styles.

Setup Global CSS Properties for Cypress Component Tests

To create our first test, you’ll create a spec file that pairs with the component. Usual naming convention is using `filename.cy.ts` (or .js), but this can be easily set up in `cypres.config.ts` file. After you create the spec file, you can mount the component by importing it and using cy.mount() command inside an `it()` block. This will render the component inside Cypress app, but will not load all the dependencies that the component needs, like css styles. These need to be imported into the spec file manually. Since we are running our component in a browser and inside a Cypress app, we can interact with it using common Cypress commands.

Mount and Test a Vue 3 Component in Cypress

To start with component testing in Cypress you need to open Cypress and go through setup wizard that will help you out with your first steps. It will take you through a couple of steps, where you’ll install dependencies and create important configuration. Most of this is done for you, but you can customize anything. In our application, we will be working with Vue 3 framework with Vite bundler.

Setup Vue 3 Component Testing in Cypress

Jotai's state management is primitive and flexible. This gives you room to build, compose, and share state throughout your application exactly how you need it.

This flexibility can become hard to manage when you have complex requirements that span across a number of states your application can be in.

Jotai lets you leverage other state management solutions through integrations so that you can solve the problem you're facing exactly how you need to.

One of those integrations is XState. XState gives you a safe abstraction to enumerate and handle the complex states your application can be in.

With Jotai + XState, you get the flexibility and ease of use of Jotai with the power of XState.

XState is a sophisticated library to provide a better and safer abstraction for state management. 

React is one of the web’s most popular frameworks for building JavaScript applications. 

If you know what you’re doing, React can drastically simplify how you build, use, and maintain code.

Whether you’re a React newbie or you’re ready for advanced techniques, you can level-up with egghead. Explore our in-depth courses, lessons, and community resources to build more powerful applications and crack open your career.

react

Complex State Management in React with Jotai and XState

Statecharts are a formalism for modeling stateful, reactive systems. This is useful for declaratively describing the behavior of your application, from the individual components to the overall application logic.

xstate

Sometimes adding initial values through the jotai Provider is not what you want. Provider will create a whole new store with atom values

One way to initialize a state machine inside Jotai is to turn our initial `lightAtom` into a function `createLightAtom`. This function will take an `initial` property that we can pass to `createLightMachine` when we declare the function. We will then useEffect to initialize our lightMachine.

There is a small limitation with this pattern, the machine is initialized with it's default value and then over ridden with the value we pass in the effect. The initial render will use that default value while the second render will have the value we passed in.


Initialize a Xstate Machine with Jotai Atom in Atom Pattern

We currently have a machine that displays a circle of green. When you click it, it will cycle through green, yellow, and Red.

What if you wanted to pass XState initial values from Jotai, you'll need to use the `initialValues` prop on Jotai Provider and pass a list of pair (atom and value) to it.

To do this we'll refactor the creation of the lightMachine to be a function that accepts an atom as an initial value.

One note to be aware of is that this initial value will only be set when the XState machines instantiate.


Provide XState with Initial Values through Jotai Provider

Sometimes you need to display values in specific ways throughout your application based on the state that you are managing. The way to do this is to derive your state so you don't have to track multiple stateful items.

In Jotai, this is accomplished by creating an atom, getting the value from another atom that you are managing (in this case from Xstate), and using that value how you need it in your derived atom. This atom will be re-evaluated every time the managed state changes.

This pattern is great to use if you have complex state managed in something like Xstate but need a derived state value that is not strongly tied to that managed state. The pattern works the same for async and synchronous function calls as well as pulling in multiple atoms and libraries to use in your derived state.


Derive Jotai Atom State from Complex State Managed in Xstate 

Jotai has a primitive and flexible API, because of this it's up to you on how you manage your state within an atom. 

Sometimes your state is complex enough to warrant a sophisticated library for safer abstraction. This is where you can install xstate to your application and Jotai will work seamlessly with the state machines that you define using `atomWithMachine`.

This allows you to consume the machine like any other atom in your components with `useAtom`. 

As an added bonus, I'll show you how to use xstate's visualizer to develop and interact with your state machine in dev tools. 


Handle Complex State in Jotai with XState using atomWithMachine

[Storybook](https://storybook.js.org/) is already powerful for being able to develop components in isolation as well as using those stories as living documentation for others. [Nx](https://nx.dev) goes a step further. It leverages the fact that Storybook exposes an `iframe.html` that allows to access the rendering of the story without the actual Storybook frame. On top of that, Nx generates a Cypress configuration to run tests against the Storybook stories.

Prefer to read along as well? Here's the [accompanying article](https://blog.nrwl.io/use-cypress-with-next-js-and-nx-to-battle-test-your-react-components-da273f664f81).


Write Cypress Tests for our React Storybook Components with Nx

[Nx](https://nx.dev) promotes best practices by automatically generating [Cypress](https://www.cypress.io/) based e2e tests for all applications inside an Nx monorepo workspace. Not only does Nx take away the burden of configuring Cypress, but it also allows to easily serve Cypress in "watch" or headless mode. The latter is particularly useful to also run in your CI pipeline. When you run Cypress test with Nx, it automatically makes sure to first launch the tested application, then run Cypress and point it to the running application. 

Prefer to read along as well? Here's the [accompanying article](https://blog.nrwl.io/use-cypress-with-next-js-and-nx-to-battle-test-your-react-components-da273f664f81).

Write e2e Tests for our Next.js Application with Nx and Cypress

The pluggable linting utility for JavaScript and JSX.

eslint

We can leverage GitHub Actions to automate the running of all of our accessibility auditing tools as part of a Continuous Integration (CI) workflow. 

Auditing tools will only catch a percentage of potential accessibility issues, it is no replacement for manual testing.  But being able to automate the auditing will add efficiencies to our testing and provide an early warning system that can be run much more frequently than it’s practical to perform manual testing.  Additionally, we can use our CI suite as a safety net to prevent code changes that break accessibility from being able to be merged.

## Resources
* https://app.egghead.io/lessons/react-set-up-eslint-to-audit-accessibility-issues-in-react
* https://docs.cypress.io/guides/continuous-integration/github-actions#Basic-Setup
* https://github.com/cypress-io/github-action

Automate Accessibility Audits with GitHub Actions

“a11y” stands for “accessibility.” It is a numeronym, with 11 representing the count of letters between the letter a and the letter y.

Accessibility is broken down into 4 categories of disability: visual, cognitive, auditory, motor. 

Regardless of the category of disability, accessibilities aim in web development is to make applications and websites usable for everyone.

a11y

To audit our app for accessibility issues at runtime we can use Cypress to run our application in a browser environment and then with the aid of the axe-core `cypress-axe` library we can analyze the current page for any accessibility issues.

## Resources
* https://www.cypress.io/
* https://github.com/component-driven/cypress-axe
* https://mochajs.org/#bdd
* https://www.chaijs.com/guide/styles/

Write E2E Tests for Accessibility Using aXe-core and Cypress

Server may respond differently when providing a response to a logged in user. Usually, a user is identified when an authorization header is sent with the request. With .intercept(), we can dynamically add a header to a request and skip the login process. Server will provide the same response as it would when a user would go through login process.

Send Network Requests with Authorization Headers in an Intercepted Request with Cypress

When user waits too long, we might want to give them an option to reload page and try again. This is usually a hard case to reach and test effectively. But the .intercept() command provides us with a `throttleKbps` option that can limit the bandwidth, or we can use `delay` option that will delay our response for a given time.

Test Slow Network Conditions in Cypress by Throttling and Delaying Intercepted Requests

In this lesson, you'll discover how to style View Transitions using CSS pseudo-selectors to create custom animation effects. We'll transform the default cross-fade into a smooth slide transition by targeting the ::view-transition-old and ::view-transition-new pseudo-elements. You'll learn how these powerful selectors give you precise control over your transition animations, allowing you to create more engaging and personalized user experiences with just a few lines of CSS.

Customize View Transitions with CSS Using view-transition-old and view-transition-new

In this lesson, you'll learn how to implement smooth state transitions in your web applications using the browser's built-in View Transitions API. We'll create a simple example that demonstrates how to animate between different text states with just a few lines of code - no external libraries required. This powerful native API makes it easy to add professional-looking transitions to your user interface, enhancing the user experience with minimal effort.

Create Smooth UI Transitions with the Native View Transitions API

I've been using Cursor for a very long time and their "Agent" feature in Composer is fairly new, so I'm still getting used to it. But since Windsurf recently got onto the stage with their Cascade agent, they've slowly been gaining the mind share on the UX for coding agents. I decided to put them to the test by putting Windsurf and Cursor on the exact same screen side by side trying to accomplish the same task and to see which workflow I would prefer. I've been a diehard Cursor user for over a year now, so it's going to take a lot for me to switch to a different IDE. But I just have to say, even from this simple demo, Windsurf is looking pretty nice.

This lesson is just going to walk through creating a CLI using both tools to print out inspirational quotes and to explore how they approach the step-by-step of installing packages and running commands and setting up all the files we need to get this running.

Windsurf Cascade vs. Cursor Composer Agent Side-by-Side Comparison

This TypeScript tutorial explains how to use generics, allowing for different types to be passed as arguments. It discusses the use of shorthand syntax in generics and illustrates with examples. This method is useful for library creation, providing type safety and control to the user.

```typescript
interface PhotoMetadata<T> {
  title: string;
  takenAt: Date;
  customData: T;
}

// Function that processes a photo with custom metadata
function processPhoto<T>(photo: PhotoMetadata<T>): {
  processedTitle: string;
  daysSinceCapture: number;
  customDataSummary: T;
} {
  const today = new Date();
  const daysSinceCapture = Math.floor(
    (today.getTime() - photo.takenAt.getTime()) / (1000 * 60 * 60 * 24)
  );

  return {
    processedTitle: photo.title.toUpperCase(),
    daysSinceCapture,
    customDataSummary: photo.customData
  };
}

// Example usage with different custom data shapes
type CameraSettings = {
  iso: number;
  aperture: string;
  shutterSpeed: string;
}

type LocationData = {
  latitude: number;
  longitude: number;
  locationName: string;
}

// Using with camera settings
const photoWithCamera: PhotoMetadata<CameraSettings> = {
  title: "Sunset at beach",
  takenAt: new Date('2024-01-15'),
  customData: {
    iso: 100,
    aperture: "f/2.8",
    shutterSpeed: "1/1000"
  }
};

// Using with location data
const photoWithLocation: PhotoMetadata<LocationData> = {
  title: "Mountain vista",
  takenAt: new Date('2024-02-01'),
  customData: {
    latitude: 45.5231,
    longitude: -122.6765,
    locationName: "Mount Hood"
  }
};

const processedCameraPhoto = processPhoto(photoWithCamera);
const processedLocationPhoto = processPhoto(photoWithLocation);

processedCameraPhoto.customDataSummary.iso
processedLocationPhoto.customDataSummary.longitude

```

Basic Explanation of Typescript Generics

A very basic explanation of generic function arguments

I've been using Cursor as my primary editor for over a year now, but recently I've heard wonderful things about Windsurf AI Agent features. I decided to record myself building out something I've always wanted to make, but never made the time for.

In this lesson, I demonstrate how to leverage Windsurf's powerful agent process to create a fun word-guessing game inspired by Heads Up. Watch as I build an interactive application featuring category selection and word navigation, complete with data hosting on GitHub Gists and deployment to GitHub Pages - all in under 30 minutes (before editing the lesson down to 12 minutes)!

What makes this project particularly exciting is how Windsurf eliminates the typical friction points of development. While this game was always on my project wishlist, the overhead of setup, configuration, and deployment made it hard to justify the time investment. Windsurf's agent process handles all these pain points seamlessly, from managing URLs to orchestrating deployment.

This lesson perfectly showcases how AI agents can help developers bring their backlog of project ideas to life, transforming what would typically be time-consuming tasks into efficient, enjoyable development experiences.

Build a Word Game with Windsurf's Cascade AI Agent



Discover how to harness the power of Cursor IDE's Composer Agent feature to optimize your code. In this lesson, you'll witness an AI agent doing all the work to generate test suites, implement performance benchmarks, and create optimized function variations - all without writing a single line of code. You'll learn how to validate performance improvements through data-driven benchmarking, ensuring that optimizations are backed by concrete metrics rather than speculation. This hands-on demonstration showcases a groundbreaking approach to automated function development that combines the precision of test-driven development with the efficiency of AI-powered optimization.


Agent-Driven Development in Cursor: Testing, Benchmarking, and Optimizing Functions

This course is aimed for using `zod` effectively in projects based on TypeScript (both browser and node.js). The benefits you gain with this course is not just simply coding, but also understanding when/why/how should you perform runtime validation.

`zod` is the missing piece to TypeScript's capabilities, which can guarantee type-safety only in compile-time.

`zod` can be used whenever the compiler cannot guarantee what happens in runtime. And... it's a very frequent usecase, such as HTTP calls, websockets, etc.

In this course you get quickly up and running by:
1. using `zod` with primitives and objects
2. adapting `zod` quickly to existing projects thanks to automatic generators
3. changing the strategy frm type-first to schema-first
4. using error-throwing `parse` or non-error-throwing `safeParse` basing on your needs
5. applying `zod` to the most common usecase - validating API responses
6. handling errors the most convenient way (out of many!)

Take advantage of runtime validation with `zod`. Take advantage of the detailed lessons in this course 🔥

Effective Runtime Type Checks with Zod


Cursor can now automatically run commands in the terminal and walk step-by-step towards building out your entire project. You give it a goal, then it will suggest the commands you need to run and the files that you need to create and you can work with it to achieve what you're building. This lesson does a quick walkthough of using a Cursor Agent to build a project from scratch and guide it along the way. Cursor Agents definitely feel like a sneak peek at the future of programming!

Cursor Agents Initial Impressions - Allow an AI to Build Your Entire Project

Mock Service Worker is an API mocking library that allows you to write client-agnostic mocks and reuse them across any frameworks, tools, and environments.



Mocking WebSocket APIs with Mock Service Worker


While using anonymous functions might seem convenient, they can create difficulties when trying to identify performance bottlenecks during profiling. This lesson will demonstrate how named functions make it easier to pinpoint and address performance issues, ultimately leading to more efficient and debuggable code. Learning this practice will greatly improve your ability to locate and fix performance issues in complex projects.

Search

Search Results