Learn Elixir, Flux and Jasmine

These videos include the introductory steps to writing your first Elixir function and beginning to understand some key concepts in Elixir that make it unique. 

Some of those concepts include:
- the Mix build tool
- project structure
- collections of functions written in modules
- function *arity*
- pattern matching and common uses for it
- the pipe operator

Elixir is a dynamic, functional language designed for building scalable and maintainable applications.

Elixir leverages the Erlang VM, known for running low-latency, distributed and fault-tolerant systems, while also being successfully used in web development and the embedded software domain.

elixir

Getting Started with Elixir

Bootstrap a new Elixir project using Mix (a build tool included when you install Elixir), with its built in project generation.

Additional resources:
- [Official introduction to Mix](https://elixir-lang.org/getting-started/mix-otp/introduction-to-mix.html#our-first-project)

Generate a new Elixir project using Mix

Elixir code is organized into groups of functions called modules. You can create your own modules and built on top of predefined modules that are a part of Elixir by default.

Additional resources: 
- [Getting started with Modules and function from Elixir docs](https://elixir-lang.org/getting-started/modules-and-functions.html)

Write a New Function Inside of an Elixir Module

The syntax to pass arguments into functions is akin to many other languages. Elixir functions are uniquely recognized when running based off of the number of arguments passed in (a term called *arity*). This means you can define functions with the same name, so long as a different number of arguments is passed in.

Arity is a key concept to be aware of when reading documentation and writing your own code.

Additional resources:
- [Information about arity](https://elixir-lang.org/getting-started/modules-and-functions.html#function-capturing)
- [Default arguments in functions](https://elixir-lang.org/getting-started/modules-and-functions.html#default-arguments)

Pass arguments into Elixir functions and understand arity

Elixir uses `=` as an operator, but rather than assigning values to variables with it, it *matches* values on the right hand side of the `=` with the left side. This can be used in simple values, more complex data structures, and powerful condition checking.

Put into simpler terms, pattern matching is Elixir's way of assigning variables.

Additional resources:
- [Elixir docs on pattern matching](https://elixir-lang.org/getting-started/pattern-matching.html)

Pattern match values in Elixir

Some common uses for pattern matching in Elixir include checking conditions and passing parameters into functions. It's useful for pulling out only specific variables from collections of data.

Additional resources:
- [Elixir docs on pattern matching](https://elixir-lang.org/getting-started/pattern-matching.html)

Pattern match in conditions and function parameters in Elixir

AngularJS is an open-source JavaScript framework, maintained by Google, that assists with running single-page applications. Its goal is to augment web-based applications with model–view–controller (MVC) capability, in an effort to make both development and testing easier.

angularjs

In this lesson Trevor looks at testing AngularJS controllers with scope inheritance with Jasmine and test spies.

Testing Controllers With Dependencies

React is one of the web’s most popular frameworks for building JavaScript applications. 

If you know what you’re doing, React can drastically simplify how you build, use, and maintain code.

Whether you’re a React newbie or you’re ready for advanced techniques, you can level-up with egghead. Explore our in-depth courses, lessons, and community resources to build more powerful applications and crack open your career.

react

Actions contain no functionality, but rather describe an event in our application.  In this lesson we will describe our Actions as they relate to our application.  These Actions will then be available for triggering in our Views and for execution in our Store.

React Flux: Actions

In Flux our Components are referred to as Views, but they are the same familiar Components associated with any React development.  In Flux, however, we have the benefit of the architecture to keep us from having to pass down through a long chain of children Components any functionality that may be embedded in our Stores.  In this Lesson we will wire up all of our Components in record time utilizing the architecture we've already established.

React Flux: Components/Views

Stores are where the real work in our application is done.  Dispatchers broadcast Actions to all Stores, and the Stores registered to listen for those Actions will perform any logic needed to update our Views.  In this lesson we will establish our first Store and register the Actions we wish to respond to.

React Flux: Stores

Our build process during this series will utilize both gulp and browserify.  In this lesson we will take a moment to setup our environment and all of the tooling required to begin developing our Flux Application.  We've kept the build process very simple so porting it to grunt should be a breeze, but this also serves as a simple primer for those who may not be familiar with gulp.

React Flux: Development Environment Setup

Organizing modules and components is a critical aspect of the development of any single-page web application (SPA). In this lesson we will look at refactoring the Flux React store into a more module structure.

React Flux: Project Organization

Flux has four major components: Stores, Dispatchers, Views, and Actions.  These components interact less like a typical MVC and more like an Event Bus.  In this lesson we will start by creating our Dispatcher which queues up our Actions as Promises and executes them as they are received.  We'll also create an AppDispatcher which, unlike the Dispatcher, is more specific to our application.

React Flux: Overview and Dispatchers

As your React Flux application grows, it is inevitable that you start to see functionality and code repeated. With React, you can easily keep things DRY by using mixins.

React Flux: Remove Duplicate Code with Mixins

With this lesson, we will bring it all together, using what we've learned in the series to fisnish out the React Flux architecture example.

The completed code for this series can be found [here on Github](https://github.com/eggheadio/egghead-react-flux-example).

React Flux: Wrapping Up

By default, React doesn't have built in routing. We will add routing to our application with the react-routing-component.

React Flux: Routing with react-router-component

Custom Jasmine Matchers are a great way to keep your AngularJS Unit Tests clean and tidy. We want to make expectations **readable** and express the intent of the test. Custom matchers help to accomplish this.

Custom Jasmine 1.3 Matchers

An introduction on unit testing a ReactJS component using Webpack and Jasmine. Learn how to use Webpack to package and import dependencies plus take advantage of the babel-loader to write a simple Jasmine spec using the latest ES6 syntax.

Unit testing a React component using Jasmine and Webpack

AngularJS provides helpers for convenient testing of your application. In this lesson you will learn how to test a basic controller with Jasmine and Angular.

Testing a Controller

In this lesson John shows some tricks for speeding up your test suite. He digs into some handy features of WebStorm, including the *ddescriber* plugin, as well as some alternative methods for Jasmine for selectively running your tests.

Speed Testing with WebStorm and Jasmine

One of the beautiful things about dependency injection in your AngularJS apps is the ability to replace dependencies in your unit tests. In this lesson Trevor looks at how to configure Jasmine spies as injectable replacements for dependencies for testing.

Topics

Instructors

Content Type