Learn Elixir, Grunt and Ruby

Rails is a web-application framework that includes everything needed to create database-backed web applications according to the Model-View-Controller (MVC) pattern.

rails

If you make a mistake when naming your database column, and have data that you want to keep unchanged. You can use the change method with the rename_column definition in your migrations files to update a single column name in your database.

Rename A Database Column with Ruby on Rails Active Record Migrations

Elixir is a dynamic, functional language designed for building scalable and maintainable applications.

Elixir leverages the Erlang VM, known for running low-latency, distributed and fault-tolerant systems, while also being successfully used in web development and the embedded software domain.

elixir

Some common uses for pattern matching in Elixir include checking conditions and passing parameters into functions. It's useful for pulling out only specific variables from collections of data.

Additional resources:
- [Elixir docs on pattern matching](https://elixir-lang.org/getting-started/pattern-matching.html)

Pattern match in conditions and function parameters in Elixir

Elixir uses `=` as an operator, but rather than assigning values to variables with it, it *matches* values on the right hand side of the `=` with the left side. This can be used in simple values, more complex data structures, and powerful condition checking.

Put into simpler terms, pattern matching is Elixir's way of assigning variables.

Additional resources:
- [Elixir docs on pattern matching](https://elixir-lang.org/getting-started/pattern-matching.html)

Pattern match values in Elixir

These videos include the introductory steps to writing your first Elixir function and beginning to understand some key concepts in Elixir that make it unique. 

Some of those concepts include:
- the Mix build tool
- project structure
- collections of functions written in modules
- function *arity*
- pattern matching and common uses for it
- the pipe operator

Getting Started with Elixir

The syntax to pass arguments into functions is akin to many other languages. Elixir functions are uniquely recognized when running based off of the number of arguments passed in (a term called *arity*). This means you can define functions with the same name, so long as a different number of arguments is passed in.

Arity is a key concept to be aware of when reading documentation and writing your own code.

Additional resources:
- [Information about arity](https://elixir-lang.org/getting-started/modules-and-functions.html#function-capturing)
- [Default arguments in functions](https://elixir-lang.org/getting-started/modules-and-functions.html#default-arguments)

Pass arguments into Elixir functions and understand arity

Elixir code is organized into groups of functions called modules. You can create your own modules and built on top of predefined modules that are a part of Elixir by default.

Additional resources: 
- [Getting started with Modules and function from Elixir docs](https://elixir-lang.org/getting-started/modules-and-functions.html)

Write a New Function Inside of an Elixir Module

Bootstrap a new Elixir project using Mix (a build tool included when you install Elixir), with its built in project generation.

Additional resources:
- [Official introduction to Mix](https://elixir-lang.org/getting-started/mix-otp/introduction-to-mix.html#our-first-project)

Generate a new Elixir project using Mix

Jekyll is a parsing engine bundled as a ruby gem used to build static websites from dynamic components such as templates, partials, liquid code, markdown, etc. Jekyll is known as "a simple, blog aware, static site generator".

jekyll

[Jekyll](https://jekyllrb.com/) is a static site generator built in [Ruby](https://www.ruby-lang.org/en/) and available to generate and host websites on [GitHub Pages](https://pages.github.com/). In this course, you'll install the Jekyll gem, use the command line tool to generate a new project, inspect the scaffolded project, and finally, serve the starter website.

Install Jekyll and generate initial, scaffolded website

The pipe operator is an easy to use and powerful feature of Elixir. It takes the output from the expression on the left, and automatically passes it as the first argument to the function on the right. This is especially useful when chaining together multiple function calls or data transformations. Using the pipe operator results in code that's easier to read, write and refactor.

Chain Function Calls with the Pipe Operator in Elixir

grunt

Grunt will clean up your build with the grunt-contrib-clean to make sure that no artifacts from previous builds are hanging around.

Cleaning your build folder with grunt-contrib-clean

For production we want to use minified javascript to reduce the payload that is sent from the server. This can easily be accomplished with grunt-uglify.

Minifying your output with grunt-uglify

You can use Grunt to combine all of your Javascript files into a single concatenated file.

Concatenating Your Javascript with grunt-contrib-concat

AngularJS is an open-source JavaScript framework, maintained by Google, that assists with running single-page applications. Its goal is to augment web-based applications with model–view–controller (MVC) capability, in an effort to make both development and testing easier.

angularjs

With Grunt you can automate core tasks for your AngularJS project. In this lesson we will take a look at converting Stylus files to CSS, and add a watch task to convert those files automatically whenever a change is detected.

Development Automation Tasks with Grunt

Task automation is critical for any AngularJS single-page application. Grunt gets the job done.

Introduction to Grunt for Angular

Build and watch ECMAscript 6 using traceur compiler and Grunt.

traceur compiler and Grunt

Create a search directive with AngularJS and Rails. You'll want to take a look at the related [Rails TODO API Part 1](https://egghead.io/lessons/angularjs-rails-todo-api-part-1) and [Rails TODO API Part 2](https://egghead.io/lessons/angularjs-rails-todo-api-part-2). This is **not** a Rails how-to, so some knowledge there is expected to get up and running.

Search Directive with Rails

Expanding on [Part 1](https://egghead.io/lessons/angularjs-rails-todo-api-part-1), this lesson will look at how to bootstrap AngularJS in a rails application as part of the asset pipeline. With Angular available, you'll see how to communicate with the Rails API using $resource.

Rails Todo API Part 2

Rails makes an excellent choice for delivering data to AngularJS via REST apis. In this first lesson of a two part series, you'll see how to create a simple API for CRUD operations on TODOs using Rails. This isn't an introduction to Rails, and assumes you know the basics. 

Rails Todo API Part 1

Grunt Multitask allows you to write complex tasks that run multiple targets. In this lesson, John will show you how to use Multitask in your GruntJS builds.

Multitask

In this lesson John will show you how to create a simple external config file for your GruntJS build.

External Config

In this lesson John will show you how to start using Grunt Uglify to compress your javascript for production deployment.

Uglify

When we import assets in React components outside of the `public` folder that Nitro reads for assets by default when running the development server we need to tell Nitro how to find them with the `devProxy` configuration option.

```typescript
export default defineNitroConfig({
  renderer: './renderer.ts',
  devProxy: {
    '/app/assets': 'http://localhost:5173/app/assets'
  }
})
```

This is ultimately inadequate in scenarios where you want to import assets arbitrarily and have them "just work" but works in a pinch.



Use devProxy in Nitro Config to Serve Static Imported Assets in Dev Mode via Vite

Learn how to use devProxy in Nitro Config with Vite to serve static assets in React components in dev mode.

Start with a basic Vite React TypeScript app and enhance it for production use by integrating Nitro as the server. 

This requires a custom Vite plugin for nitro as well as a custom renderer and manually creating Nitro config.

The other way to approach this would be to add Vite to a Nitro app instead. Same basic result.

The [Nitro config reference](https://nitro.unjs.io/config) is a great read of you'd like to explore more options.


Configure a Vite React TypeScript Application on a Basic Nitro Server

Configure a Vite React TypeScript app by integrating Nitro for production, using custom plugins, renderers, and configs.

Quick Get Started style introduction to Vite using `pnpm create vite` with the React TypeScript template.

See [more in the official docs](https://vite.dev/guide/).

Create a Vite App with the React TypeScript Preset

Quick guide to start a Vite app using React TypeScript template with pnpm.

Over the years, your application have grown huge. Sometimes, really HUGE.

Many developers have contributed to the codebase. One day they pushed one coding style, a different one another day. Sometimes even different patterns and solutions for similar problems.

You want to keep your codebase consistent. In the Angular ecosystem, there were well established patterns for doing things the right way ™️. But the old solutions are being challenged by signal-based approach.

Eventually, you ask yourself the key question: **Should you integrate with the NEW solutions or stick to the battle-tested ones, but already considered LEGACY**?

That's a very good question indeed. Don't rush with architectural decisions 🤓.

## 👉 First, think of what problems you want to solve by introducing the change.

Do you have 1k LoC Angular components? Maybe even 2k? Do you and your team enjoy working with these? 😏

Where does the **domain logic and state management code** belong to - do you have a clear guidance on which code should be put where? Have you spot that different devs implement similar features in totally different ways?

Do you keep on asking the same questions over and over again: **whether this certain piece of code** should be **imperative** (plain old object properties and variables) or **reactive** (streams)? It'd be nice to keep all thinga reactive, but more often than not, it introduces complexity.

## 👉 Second, think of long-term consequences.

You are going to have more than one way to **manage the state**. But is that really an issue? If your codebase is modular, separate modules should not depend on each other in any way. Inner abstractions of one should be invisible to the other, etc.

You are going to introduce a **new tool**. On one hand, you need to learn it, and so does your team. But on the other hand, it's a breathe of fresh air. And it's useful to question the way you've been doing things so far. Maybe there's a more effective way?

You are going to embrace signal-based APIs. And that means taking taking advantage of Zoneless Angular. This means using all modern Angular APIs. And you know that signals are the future. Why would you want to stick to the **less performant, less type-safe, less flexible and, objectively, less effective solutions**?

## 👉 Finally, plan your INCREMENTAL integration.

INCREMENTAL is the absolute keyword here. You don't want to tell your PM you need to stop delivering features because of a refactor.

Actually, there's no need for a "refactor". Just pick the first new feature to be implemented. Or pick the one that needs to be extended.

NGRX Signal Store allows you to create both very simple & small stores, as well as bigger ones. **Composition** is the key here.

**Start simple**.

Create a `withState` section with the signals that hold the state. That's already reactive. And relatively simple.

```ts
const initialState: CartState = {
  items: ...,
  rebate: ...,
}

export const CartStore = signalStore(
  withState(initialState)
);
```

Create a `withMethods` section to provide ways to change the state:

```ts
export const CartStore = signalStore(
  ...
  withMethods((store) => ({
    addItem(item: ShoppingItem): void {
      patchState(store, (state) => ({ items: [ ...state.items, item ] }));
    },
    ...
);
```

Create a `withComputed` section to provide all derived computations:

```ts
export const CartStore = signalStore(
  ...
  withComputed(({ items }) => ({
    totalPrice: computed(() => items().reduce(...))
    ...
);
```

**Start simple**.

Now you can (literally) **`inject` this code into your existing solution**. All you need is to inject your brand new NGRX Signal Store implementation into a component, or a service:

```ts
@Injectable()
class ExistingBigService {
  cartStore = inject(CartStore)
  //...  
}
```

and that's it! What's beatiful is that NGRX Signal Store should remain an implementation details (of a component, service, etc). It **shouldn't leak outside to the entire application unintentionally**. Small NGRX Signal Stores help us to **keep logic more modular**.

Don't hesitate - give NGRX Signal Store a try! Start with the [_**Scalable Signals Angular Architecture with NGRX Signal Store**_](https://egghead.io/courses/scalable-signals-angular-architecture-with-ngrx-signal-store-a33abd39) course now!

Integrating NGRX Signal Store with an existing Angular application


Integrate NGRX Signal Store into your Angular app incrementally for modular, reactive state management. Improve consistency and performance with modern APIs.

In React 19, managing script tags efficiently within components can lead to performance enhancements and simpler code structures.

Originally, using script tags directly in a React component involved complex setups, like using `useEffect` to dynamically add JavaScript code. For instance, a component might dynamically inject script tags to load external widgets. This approach, while functional, resulted in multiple script tags and duplicate iframe elements. This duplication not only cluttered the output but also negatively impacted performance by loading scripts multiple times.

The workaround for this would be to manually hoist any common scripts and maybe load them when they weren't needed by any components.

With React 19 we now have a more effective method. This involves directly placing the script tag within the React component's return statement. This approach ensures that React handles the script loading, avoiding the duplication of script tags.

By implementing the script tags this way, the loading initiator becomes React DOM, which efficiently manages script loading and deduplication. This setup prevents multiple requests for the same script when the component is rendered multiple times, enhancing the overall application performance.

Furthermore, directly embedding the script tag simplifies the code, making the component cleaner and more maintainable.

Efficiently Render Script Tags in React 19 Components

Learn how to efficiently render script tags in React 19 components to improve performance by avoiding duplicate script loads and simplifying your code.

Let's learn how to dynamically manage title tags in React 19 applications. Rendering `<title>` dynamically is simple enough, however, a challenge arises when multiple title tags are present in the document, which can lead to issues with screen readers and search engine optimization (SEO). The solution presented involves ensuring that only one title tag is rendered at a time by using conditional rendering.

Also we need to make sure to have a single string within the title tag using a template literal, ensuring our HTML remains valid and optimized.


Deduplicate Title tags with React 19

Learn to manage multiple title tags in React 19 dynamically. Ensure accessibility and SEO by preventing duplicate title tags with clear examples.

In React 19, we can easily add a title tag like "Starship Deets" which then appears in the head section of the HTML even when we render it inside our components. This method also applies to meta tags such as character set and viewport settings, which are also lifted to the head section automatically.

This is an awesome feature because it maintains the same composition style we are familiar with in React components. It simplifies the handling of HTML head elements without needing extra setups like `useEffect` for accessing the head section. Even in situations where our components are rendering within a body element, like within a div, we can manage our head content directly within our components. React takes care of hoisting these elements where they need to go.


Hoist Title and Meta tags in React 19

Hoisting title and meta tags directly in React 19 components allows for simpler composition, similar to other React elements. Manage meta and title tags.

<PodcastLinks />

Dax Raad, known for his strong opinions on Twitter, sat down for a chat about web dev, career moves, and building cool stuff. He's not afraid to throw some heat at popular tools like [Next.js](https://nextjs.org/), though he still helps people use it. Dax is particularly excited about local-first development, which he thinks isn't getting enough attention. He argues that sometimes the best web dev move is to step away from web dev entirely and explore other areas of programming.

When it comes to career growth, Dax encourages developers to think beyond the "web dev" label and see themselves as programmers capable of tackling any challenge. He advocates for trying out weird stuff and learning unusual languages, as these experiences can lead to unexpected opportunities. Taking smart risks in your career can open doors to awesome possibilities.

In the business world, Dax is a fan of making "asymmetric bets" - moves with low downside but huge potential upside. He applies this philosophy to his work on [SST](https://sst.dev/), reasoning that even if it fails, he'll walk away with valuable experience. He also emphasizes the importance of resisting quick payouts in favor of potentially bigger wins down the road.

Looking to the future of tech, Dax is betting on local-first development. He sees potential in getting in early on emerging technologies like [Solid.js](https://www.solidjs.com/). Building in public and making connections in new tech communities can pay off in unexpected ways.

Dax also challenges the notion of constant hyper-productivity in tech. He suggests balancing focused work with time for exploration and learning. Sometimes, he points out, what seems like a "dumb" choice (like learning a niche language) can turn out to be a smart career move in the long run.

## Good Stuff Mentioned

- [Next.js](https://nextjs.org/)
- [Vercel](https://vercel.com/)
- [SST](https://sst.dev/)
- [Elixir](https://elixir-lang.org/)
- [Solid.js](https://www.solidjs.com/)
- [RepliCache](https://replicache.dev/)
- [Linear](https://linear.app/)
- [Remix](https://remix.run/)
- [Shopify](https://www.shopify.com/)
- [React](https://react.dev/)

Developer Career Growth and Asymmetric Bets with Dax Raad

<PodcastLinks />

Dev and Joel discuss React Miami conference, praising its fun atmosphere and location. They chat about React Server Components, with Dev sharing his experience building a mini framework. They talk about Vinxi, Nitro, and the unjs ecosystem as tools for creating custom frameworks. The conversation touches on Vue's popularity outside web dev circles and non-web dev conferences. They discuss the benefits of TypeScript and strongly-typed APIs. Dev mentions his upcoming talk on durable objects at [a conference in Dallas](https://x.com/DThompsonDev/status/1829674506237194456). They end by discussing WebSockets, PartyKit, and platform-specific frameworks.

## What's Good?

- [React Miami Conference](https://www.reactmiami.com/) 
- [Brenley Dueck's blog post on Simple RSC with Vinxi:](https://www.brenelz.com/posts/simple-rsc-with-vinxi/)
- [Vinxi](https://github.com/nksaraf/vinxi)
- [Nitro](https://nitro.unjs.io/guide/configuration)
- [unjs ecosystem](https://unjs.io/)
- [Solid Start](https://start.solidjs.com/)
- [TanStack Router](https://tanstack.com/router/latest) 
- [PartyKit](https://github.com/partykit/partykit) 
- [Durable Objects (Cloudflare)](https://developers.cloudflare.com/durable-objects/)
- [Flightcontrol](https://www.flightcontrol.dev/) 
- [SST](https://sst.dev/)
- [OpenNext](https://open-next.js.org/)

Nitro, Vinxi, and RSCs - What's Good with Dev Agrawal

**Note:** This course is being actively developed and more lessons will be added in the future.

Cursor is an AI-enhnaced code editor that allows you to call upon the robots to refactor or stub out functions for you with natural language. 

In this course, John will show you workflows that will save you time and effort by utilizing the features such as its mult-line editing and context.

In particular, by giving Cursor's AI the proper context, whether that's lines of code or multiple files, you'll get better output when trying to extend or refactor logic that's present.


Bite-size video tutorials for badass web developers.

Search

Search Results