Learn Firebase, Flux and Pm2

React is one of the web’s most popular frameworks for building JavaScript applications. 

If you know what you’re doing, React can drastically simplify how you build, use, and maintain code.

Whether you’re a React newbie or you’re ready for advanced techniques, you can level-up with egghead. Explore our in-depth courses, lessons, and community resources to build more powerful applications and crack open your career.

react

Actions contain no functionality, but rather describe an event in our application.  In this lesson we will describe our Actions as they relate to our application.  These Actions will then be available for triggering in our Views and for execution in our Store.

React Flux: Actions

In Flux our Components are referred to as Views, but they are the same familiar Components associated with any React development.  In Flux, however, we have the benefit of the architecture to keep us from having to pass down through a long chain of children Components any functionality that may be embedded in our Stores.  In this Lesson we will wire up all of our Components in record time utilizing the architecture we've already established.

React Flux: Components/Views

Stores are where the real work in our application is done.  Dispatchers broadcast Actions to all Stores, and the Stores registered to listen for those Actions will perform any logic needed to update our Views.  In this lesson we will establish our first Store and register the Actions we wish to respond to.

React Flux: Stores

Our build process during this series will utilize both gulp and browserify.  In this lesson we will take a moment to setup our environment and all of the tooling required to begin developing our Flux Application.  We've kept the build process very simple so porting it to grunt should be a breeze, but this also serves as a simple primer for those who may not be familiar with gulp.

React Flux: Development Environment Setup

Organizing modules and components is a critical aspect of the development of any single-page web application (SPA). In this lesson we will look at refactoring the Flux React store into a more module structure.

React Flux: Project Organization

Flux has four major components: Stores, Dispatchers, Views, and Actions.  These components interact less like a typical MVC and more like an Event Bus.  In this lesson we will start by creating our Dispatcher which queues up our Actions as Promises and executes them as they are received.  We'll also create an AppDispatcher which, unlike the Dispatcher, is more specific to our application.

React Flux: Overview and Dispatchers

As your React Flux application grows, it is inevitable that you start to see functionality and code repeated. With React, you can easily keep things DRY by using mixins.

React Flux: Remove Duplicate Code with Mixins

With this lesson, we will bring it all together, using what we've learned in the series to fisnish out the React Flux architecture example.

The completed code for this series can be found [here on Github](https://github.com/eggheadio/egghead-react-flux-example).

React Flux: Wrapping Up

By default, React doesn't have built in routing. We will add routing to our application with the react-routing-component.

React Flux: Routing with react-router-component

AngularJS is an open-source JavaScript framework, maintained by Google, that assists with running single-page applications. Its goal is to augment web-based applications with model–view–controller (MVC) capability, in an effort to make both development and testing easier.

angularjs

The Firebase Forge provides a convenient GUI for visualizing and manipulating your data in real-time. Be sure to check out [this lesson](https://egghead.io/lessons/angularjs-get-started-with-firebase-and-angularfire) for getting Firebase setup.

Updating Real-Time Data with Firebase Forge

PM2 is a production process manager for Node.js applications with a built-in load balancer. It allows you to keep applications alive forever, to reload them without downtime and to facilitate common system admin tasks.

This video shows how to enable features in your pm2 config file that allow you to prevent runaway apps from bringing your server down. Setting max memory used, number of running processes allowed and maximum restart attempts are all covered.

Controlling runaway apps using pm2

When using Firebase collections in your AngularJS application, you have access to a handy set of events emitted by the collection when changes in your data occur. Be sure to check out the [first lesson](https://egghead.io/lessons/angularjs-get-started-with-firebase-and-angularfire) in this series for the project source code.

Firebase Event Handling

In this video, you will learn how to pass environment variables to your node.js app using the pm2 config file. This is useful for setting options inside your app such as production or development.

Passing environment variables to node.js using pm2

Firebase provides a real-time syncing backend for your AngularJS applications in very few lines of code. In this lesson, you'll learn how to get started integrating it into your app.

Get Started with Firebase and AngularFire

Data has relationships, and Firebase allows you to define those relationships in your AngularJS applications.

Firebase Data Relationships

Firebase has several ways to provide authentication for your AngularJS application. In this lesson, Lukas will look at the most basic email/password approach.

Firebase Basic Authentication Part 1

In this video, learn how to automatically restart your node.js app using pm2 when the code for your app changes. You will also learn how to exclude files and directories from restarting your app (such as static assets, css, images, etc.).

Restarting your node.js app on code change using pm2

React becomes incredibly powerful when coupled with a real-time backend like Firebase. See how easy it is to bring the two together and chat with Star Wars characters while you're at it.

React and Firebase with ReactFire

Authenticating with Firebase creates a 24 hour session for the user. This allows you to fetch the current session for the user, as well as logout the user and destroy the session.

Firebase Basic Authentication Part 2

🔥 Firebase provides several easy-to-use authentication methods that we can use to handle auth in React apps. 

In this lesson, we will cover how to authenticate a user via an email and password. This is done using `createUserWithEmailAndPassword` function available to us from the `firebase` library. 

You'll need firebase configured in your application which you can [read about here.](https://dev.to/farazamiruddin/react-firebase-add-firebase-to-a-react-app-4nc9)

Authenticate a User in React with Firebase

AngularFire is the officially supported AngularJS binding for Firebase. Firebase is a backend service that provides data storage, file storage, authentication, and static website hosting for your Angular app.

angularfire

You'll learn the 2 Observables that Firebase Authentication provides to subscribe to the authentication state of your application, `authState` and `user`.

You'll see how they both return the same `User` object from Firebase Authentication.

And you'll learn that the difference is that `authState` triggers when the user logs in, or logs out of the application, while `user` is called both of those times, and also is called when Firebase refreshes the user's authentication token.

As a personal guideline, if I need to do an operation when the user's token is refreshed (_for example, update a 3rd party service_) I'll use `user`, if not, I'll default to `authState`.

Topics

Instructors

Content Type

Free or Pro