Learn Flow, Greensock and Grunt

Ultra high-performance, professional-grade HTML5 animation for the modern web

greensock

The `gsap.set()` tween (or animation container) is a zero-duration tween that instantly applies a property to an HTML element. In addition, there is a subtle but important difference between `opacity` and Greensock's `autoAlpha` properties. You will learn how to hide a menu on page load and also how to prevent the element from flashing on page load. This lesson contains Greensock's basic building blocks that are used to create advanced animations with UI elements.

To add the latest Greensock library to your project, go to [Greensock's website](https://greensock.com/). Fun fact: GSAP stands for Greensock Animation Platform, and their current latest version is GSAP 3!

A common programming convention for Greensock I like to follow is, if you're going to animate a property with Greensock, keep it in Greensock, otherwise, if you are not going to animate a property, keep it in your CSS.

Hide a Menu with GSAP3's set() Tween and autoAlpha Property

GreenSock supports all of the CSS3 3d properties, so you can freely rotate around X, Y, and Z axises with rotationX, rotationY, and rotationZ. Once that's set up, you can tweak the perspective of the element with transformPerspective.

Spin Elements in 3d with GreenSock

By default, elements use their own perspective, so if you rotate multiple elements on the page the perspective will seem a bit off for each of them. The solution is to set the perspective on the container element, then each child element will follow the parents' perspective.

Control the Shared 3d Perspective of Multiple Elements with GreenSock

Sometimes you want to leave an animation looping without any user interaction. This is done using the "repeat" and "yoyo" properties combined to keep the tween moving back and forth from the start properties to the end properties.

Loop a Tween Forever Using Yoyo and Repeat with GreenSock

Modern development requires modern tooling. Rather than adding GreenSock as a script to an HTML page, we're going to install GreenSock using Yarn and set up our development environment using Parcel. This will allow us to quickly iterate and test out our animation ideas. GreenSock is abbreviated as `gsap` when importing.

Setup GreenSock as a Module with Parcel

Animating an element to a click event is as simple as passing the x and y coordinates of the click event to the properties of the `TweenMax.to` call. To be able to center the element where the mouse clicks, you also need to adjust the special xPercent and yPercent properties so the element is properly offset.

Animate and Center an Element to a Click Event with GreenSock

Rotating an element with GreenSock is as simple as changing the `rotation` property using `TweenMax`. But there's also a hugely convenient trick using the `+=` or `-+` syntax as a string that allows you to adjust based on the previous value of the rotation.

Rotate an Element Based on Previous Values with GreenSock

Animations often have multiple steps. GreenSock makes this simple with the concept of a timeline where you code each point you want your element to move to. This lesson will show you how to set up a timeline as well as pause and resume the timeline animation.

Create Animation Steps with GreenSock's Timeline

You often need to pause or resume an animation based on whether or not the current animation running. The `isActive()` getter returns a boolean that provides you with that information (the opposite information can be found with using the `paused()` getter).

Pause or Resume an Animation by Checking isActive with GreenSock

GreenSock also supports the ability to animate `from` a variable point to the current point. If you think `to` starts at a static point and moves to a variable point then `from` essentially does the opposite. `fromTo` supports the scenario where both points are variables and requires passing in a "from" set of properties and a "to" set of properties.

Animate From a Variable Point with from and fromTo in GreenSock

Each animation can be moved to a specific point in time based on the `progress` setting between 0 and 1 (0% and 100%). This lesson shows how to control the progress using the scroll wheel of the mouse which can easily fast-forward or rewind through the timeline.

Manually Control the Animation with progress in GreenSock

Any GreenSock animation can accept an array of dom elements. This lesson shows you how to easily create and tween 100 divs to the same point.

Control an Array of Elements with the Same Animation in GreenSock

There are many reasons you'd want to stop an animation from running. `TweenMax` provides ways to stop a tween of a specific element or every tween currently running, we are going to look at two of them, `killTweensOf` and `killAll`. This lesson walks you through stopping a tween by clicking on a specific element or stopping every tween and forcing them all to complete.

Stop Animations with killTweensOf and killAll in GreenSock

Animations attract the eye and add a higher level of engagement for your users. But they’re not easy to set up, and they don’t always look the way they should on every browser. 

Greensock is the best platform available for creating performant, highly-customizable animations. This course will walk you through the features of Greensock, including how to:

- animate an element
- manually control an animation
- animate between CSS classes

…and more, with cross-browser support to ensure your animations look sharp everywhere.

Create Amazing Animations with GreenSock

GreenSock enables you to animate between classes defined in your stylesheets using the `className` syntax in your tween properties. This lesson walks you through using the `mouseover`/`mouseout` and `mousedown`/`mouseup` events to add and remove css classes based on the specific event.

Animate Between CSS Classes with GreenSock

React is one of the web’s most popular frameworks for building JavaScript applications. 

If you know what you’re doing, React can drastically simplify how you build, use, and maintain code.

Whether you’re a React newbie or you’re ready for advanced techniques, you can level-up with egghead. Explore our in-depth courses, lessons, and community resources to build more powerful applications and crack open your career.

react

In this lesson we are going to add types throughout our basic todo list component. This includes type checking the component props, local state, and property methods. 

Type Check React Components With Flow

In this lesson we are going to take a React and Redux application and add flow types throughout. This includes type checking a react component, a reducer, some actions, and a connect method. 

Type Check Redux Apps with Flow

In this lesson, we will look at Greensock's Draggable API. We will implement a scrollable `<div>` container and explore some options available.

Create scrollable DOM elements with Greensock

flow

We'll go over some of the built-in types in Flow and how to add them to our projects by adding type annotations to our variables in JavaScript. We'll also learn about type mismatch errors when we give a variable a value that doesn't match its type annotation and how to fix it.

Primitive Types in Flow

Nuclide is the IDE Facebook employees use to write React code. But setting it up to use Flow type checking and Eslint to lint files on the fly is tricky. This video shows you how. 

Setup Nuclide to use Flow and Eslint (Mac)

Let's learn how to set up Facebook's Flow inside of a project and write a simple typecheck task that will let us run Flow against any files in our codebase.

Up and Running with Facebook Flow for Typed JavaScript

When we import assets in React components outside of the `public` folder that Nitro reads for assets by default when running the development server we need to tell Nitro how to find them with the `devProxy` configuration option.

```typescript
export default defineNitroConfig({
  renderer: './renderer.ts',
  devProxy: {
    '/app/assets': 'http://localhost:5173/app/assets'
  }
})
```

This is ultimately inadequate in scenarios where you want to import assets arbitrarily and have them "just work" but works in a pinch.



Use devProxy in Nitro Config to Serve Static Imported Assets in Dev Mode via Vite

Learn how to use devProxy in Nitro Config with Vite to serve static assets in React components in dev mode.

Start with a basic Vite React TypeScript app and enhance it for production use by integrating Nitro as the server. 

This requires a custom Vite plugin for nitro as well as a custom renderer and manually creating Nitro config.

The other way to approach this would be to add Vite to a Nitro app instead. Same basic result.

The [Nitro config reference](https://nitro.unjs.io/config) is a great read of you'd like to explore more options.


Configure a Vite React TypeScript Application on a Basic Nitro Server

Configure a Vite React TypeScript app by integrating Nitro for production, using custom plugins, renderers, and configs.

Quick Get Started style introduction to Vite using `pnpm create vite` with the React TypeScript template.

See [more in the official docs](https://vite.dev/guide/).

Create a Vite App with the React TypeScript Preset

Quick guide to start a Vite app using React TypeScript template with pnpm.

Over the years, your application have grown huge. Sometimes, really HUGE.

Many developers have contributed to the codebase. One day they pushed one coding style, a different one another day. Sometimes even different patterns and solutions for similar problems.

You want to keep your codebase consistent. In the Angular ecosystem, there were well established patterns for doing things the right way ™️. But the old solutions are being challenged by signal-based approach.

Eventually, you ask yourself the key question: **Should you integrate with the NEW solutions or stick to the battle-tested ones, but already considered LEGACY**?

That's a very good question indeed. Don't rush with architectural decisions 🤓.

## 👉 First, think of what problems you want to solve by introducing the change.

Do you have 1k LoC Angular components? Maybe even 2k? Do you and your team enjoy working with these? 😏

Where does the **domain logic and state management code** belong to - do you have a clear guidance on which code should be put where? Have you spot that different devs implement similar features in totally different ways?

Do you keep on asking the same questions over and over again: **whether this certain piece of code** should be **imperative** (plain old object properties and variables) or **reactive** (streams)? It'd be nice to keep all thinga reactive, but more often than not, it introduces complexity.

## 👉 Second, think of long-term consequences.

You are going to have more than one way to **manage the state**. But is that really an issue? If your codebase is modular, separate modules should not depend on each other in any way. Inner abstractions of one should be invisible to the other, etc.

You are going to introduce a **new tool**. On one hand, you need to learn it, and so does your team. But on the other hand, it's a breathe of fresh air. And it's useful to question the way you've been doing things so far. Maybe there's a more effective way?

You are going to embrace signal-based APIs. And that means taking taking advantage of Zoneless Angular. This means using all modern Angular APIs. And you know that signals are the future. Why would you want to stick to the **less performant, less type-safe, less flexible and, objectively, less effective solutions**?

## 👉 Finally, plan your INCREMENTAL integration.

INCREMENTAL is the absolute keyword here. You don't want to tell your PM you need to stop delivering features because of a refactor.

Actually, there's no need for a "refactor". Just pick the first new feature to be implemented. Or pick the one that needs to be extended.

NGRX Signal Store allows you to create both very simple & small stores, as well as bigger ones. **Composition** is the key here.

**Start simple**.

Create a `withState` section with the signals that hold the state. That's already reactive. And relatively simple.

```ts
const initialState: CartState = {
  items: ...,
  rebate: ...,
}

export const CartStore = signalStore(
  withState(initialState)
);
```

Create a `withMethods` section to provide ways to change the state:

```ts
export const CartStore = signalStore(
  ...
  withMethods((store) => ({
    addItem(item: ShoppingItem): void {
      patchState(store, (state) => ({ items: [ ...state.items, item ] }));
    },
    ...
);
```

Create a `withComputed` section to provide all derived computations:

```ts
export const CartStore = signalStore(
  ...
  withComputed(({ items }) => ({
    totalPrice: computed(() => items().reduce(...))
    ...
);
```

**Start simple**.

Now you can (literally) **`inject` this code into your existing solution**. All you need is to inject your brand new NGRX Signal Store implementation into a component, or a service:

```ts
@Injectable()
class ExistingBigService {
  cartStore = inject(CartStore)
  //...  
}
```

and that's it! What's beatiful is that NGRX Signal Store should remain an implementation details (of a component, service, etc). It **shouldn't leak outside to the entire application unintentionally**. Small NGRX Signal Stores help us to **keep logic more modular**.

Don't hesitate - give NGRX Signal Store a try! Start with the [_**Scalable Signals Angular Architecture with NGRX Signal Store**_](https://egghead.io/courses/scalable-signals-angular-architecture-with-ngrx-signal-store-a33abd39) course now!

Integrating NGRX Signal Store with an existing Angular application


Integrate NGRX Signal Store into your Angular app incrementally for modular, reactive state management. Improve consistency and performance with modern APIs.

In React 19, managing script tags efficiently within components can lead to performance enhancements and simpler code structures.

Originally, using script tags directly in a React component involved complex setups, like using `useEffect` to dynamically add JavaScript code. For instance, a component might dynamically inject script tags to load external widgets. This approach, while functional, resulted in multiple script tags and duplicate iframe elements. This duplication not only cluttered the output but also negatively impacted performance by loading scripts multiple times.

The workaround for this would be to manually hoist any common scripts and maybe load them when they weren't needed by any components.

With React 19 we now have a more effective method. This involves directly placing the script tag within the React component's return statement. This approach ensures that React handles the script loading, avoiding the duplication of script tags.

By implementing the script tags this way, the loading initiator becomes React DOM, which efficiently manages script loading and deduplication. This setup prevents multiple requests for the same script when the component is rendered multiple times, enhancing the overall application performance.

Furthermore, directly embedding the script tag simplifies the code, making the component cleaner and more maintainable.

Efficiently Render Script Tags in React 19 Components

Learn how to efficiently render script tags in React 19 components to improve performance by avoiding duplicate script loads and simplifying your code.

Let's learn how to dynamically manage title tags in React 19 applications. Rendering `<title>` dynamically is simple enough, however, a challenge arises when multiple title tags are present in the document, which can lead to issues with screen readers and search engine optimization (SEO). The solution presented involves ensuring that only one title tag is rendered at a time by using conditional rendering.

Also we need to make sure to have a single string within the title tag using a template literal, ensuring our HTML remains valid and optimized.


Deduplicate Title tags with React 19

Learn to manage multiple title tags in React 19 dynamically. Ensure accessibility and SEO by preventing duplicate title tags with clear examples.

In React 19, we can easily add a title tag like "Starship Deets" which then appears in the head section of the HTML even when we render it inside our components. This method also applies to meta tags such as character set and viewport settings, which are also lifted to the head section automatically.

This is an awesome feature because it maintains the same composition style we are familiar with in React components. It simplifies the handling of HTML head elements without needing extra setups like `useEffect` for accessing the head section. Even in situations where our components are rendering within a body element, like within a div, we can manage our head content directly within our components. React takes care of hoisting these elements where they need to go.


Hoist Title and Meta tags in React 19

Hoisting title and meta tags directly in React 19 components allows for simpler composition, similar to other React elements. Manage meta and title tags.

<PodcastLinks />

Dax Raad, known for his strong opinions on Twitter, sat down for a chat about web dev, career moves, and building cool stuff. He's not afraid to throw some heat at popular tools like [Next.js](https://nextjs.org/), though he still helps people use it. Dax is particularly excited about local-first development, which he thinks isn't getting enough attention. He argues that sometimes the best web dev move is to step away from web dev entirely and explore other areas of programming.

When it comes to career growth, Dax encourages developers to think beyond the "web dev" label and see themselves as programmers capable of tackling any challenge. He advocates for trying out weird stuff and learning unusual languages, as these experiences can lead to unexpected opportunities. Taking smart risks in your career can open doors to awesome possibilities.

In the business world, Dax is a fan of making "asymmetric bets" - moves with low downside but huge potential upside. He applies this philosophy to his work on [SST](https://sst.dev/), reasoning that even if it fails, he'll walk away with valuable experience. He also emphasizes the importance of resisting quick payouts in favor of potentially bigger wins down the road.

Looking to the future of tech, Dax is betting on local-first development. He sees potential in getting in early on emerging technologies like [Solid.js](https://www.solidjs.com/). Building in public and making connections in new tech communities can pay off in unexpected ways.

Dax also challenges the notion of constant hyper-productivity in tech. He suggests balancing focused work with time for exploration and learning. Sometimes, he points out, what seems like a "dumb" choice (like learning a niche language) can turn out to be a smart career move in the long run.

## Good Stuff Mentioned

- [Next.js](https://nextjs.org/)
- [Vercel](https://vercel.com/)
- [SST](https://sst.dev/)
- [Elixir](https://elixir-lang.org/)
- [Solid.js](https://www.solidjs.com/)
- [RepliCache](https://replicache.dev/)
- [Linear](https://linear.app/)
- [Remix](https://remix.run/)
- [Shopify](https://www.shopify.com/)
- [React](https://react.dev/)

Developer Career Growth and Asymmetric Bets with Dax Raad

<PodcastLinks />

Dev and Joel discuss React Miami conference, praising its fun atmosphere and location. They chat about React Server Components, with Dev sharing his experience building a mini framework. They talk about Vinxi, Nitro, and the unjs ecosystem as tools for creating custom frameworks. The conversation touches on Vue's popularity outside web dev circles and non-web dev conferences. They discuss the benefits of TypeScript and strongly-typed APIs. Dev mentions his upcoming talk on durable objects at [a conference in Dallas](https://x.com/DThompsonDev/status/1829674506237194456). They end by discussing WebSockets, PartyKit, and platform-specific frameworks.

## What's Good?

- [React Miami Conference](https://www.reactmiami.com/) 
- [Brenley Dueck's blog post on Simple RSC with Vinxi:](https://www.brenelz.com/posts/simple-rsc-with-vinxi/)
- [Vinxi](https://github.com/nksaraf/vinxi)
- [Nitro](https://nitro.unjs.io/guide/configuration)
- [unjs ecosystem](https://unjs.io/)
- [Solid Start](https://start.solidjs.com/)
- [TanStack Router](https://tanstack.com/router/latest) 
- [PartyKit](https://github.com/partykit/partykit) 
- [Durable Objects (Cloudflare)](https://developers.cloudflare.com/durable-objects/)
- [Flightcontrol](https://www.flightcontrol.dev/) 
- [SST](https://sst.dev/)
- [OpenNext](https://open-next.js.org/)

Nitro, Vinxi, and RSCs - What's Good with Dev Agrawal

**Note:** This course is being actively developed and more lessons will be added in the future.

Cursor is an AI-enhnaced code editor that allows you to call upon the robots to refactor or stub out functions for you with natural language. 

In this course, John will show you workflows that will save you time and effort by utilizing the features such as its mult-line editing and context.

In particular, by giving Cursor's AI the proper context, whether that's lines of code or multiple files, you'll get better output when trying to extend or refactor logic that's present.


Bite-size video tutorials for badass web developers.

Search

Search Results