Learn Flux, Mongodb and Svelte

Web3 is a paradigm shift in how applications are interacted with, ran, and built. 

It’s not just a Pump-and-Dump scheme on cryptocurrencies or Bored Ape NFT profile pictures you can put on Twitter.

A fundamental tenet of Web3 is bringing ownership back to the user. You no longer have to trust that your data is being properly handled on someone else’s server (although, currently Web3 ecosystem mainly depends on centralized infrastructure such as GitHub).  

This ownership is achieved through blockchain, cryptocurrencies, NFTs, and smart contracts.

A great example of this type of ownership is through how you exchange money in Web3. There is no intermediary like Stripe, or PayPal to process your transactions. You can even build your own smart contracts that receive crypto (e.g. Ethereum or ‘eth’ for short) and then process that eth how you’d like.

Building this type of smart contract is exactly what Matías is going to show you how to do right now.

Matías builds out a Web3 application that allows you to receive tips in the form of eth in a tip jar on your website. This means your application will be backed by a smart contract that’s accepts eth, stores data, and emits Solidity events.

The frontend application uses SvelteKit which you’ll see how easy it is to get up and be productive with in minutes. A huge benefit here is that the JavaScript you write is just that, JavaScript. You’ll be able to take what you learn and implement it into any framework of your choosing.

While you build this application you will learn how to:

- Write a smart contract using Solidity language
- Test the smart contract using just JavaScript through the waffle framework
- Communicate and interact with the smart contract using ethers.js in a SvelteKit application
- Deploy your smart contract to make it public and accessible to anyone

Solidity is an object-oriented, high-level language for implementing smart contracts.

solidity

Full Stack Web3 and Blockchain Development on Ethereum with SvelteKit

JavaScript community has been shaken recently by a release of Svelte 3 and for a good reason - it's a completely different approach than React or Vue. To quote the docs:

"[Svelte](https://svelte.dev/) is a radical new approach to building user interfaces. Whereas traditional frameworks like React and Vue do the bulk of their work in the browser, Svelte shifts that work into a compile step that happens when you build your app."

**The best part?** If you have 26 spare minutes you can learn the basics of Svelte 3 and start building your own apps with it!

Enjoy!



The magical disappearing UI framework

 - The web's JavaScript bloat crisis, solved. Svelte turns your templates into tiny, framework-less vanilla JavaScript.
 - Simple and familiar. Build apps out of composable, easy-to-write blocks using languages you already know.
 - Super fast, rock solid. Compile-time static analysis ensures the browser does no more work than it needs to.

svelte

Up and running with Svelte 3

MongoDB has a quite powerful aggregation framework that allows you to write data processing pipelines. Documents in the MongoDB collection go through a series of stages or a pipeline that transforms them into an aggregated result. In this short video series, you will learn how to write aggregations in MongoDB.

mongodb

MongoDB Aggregation Framework

Express is a minimal and flexible Node.js web application framework that provides a robust set of features for web and mobile applications.

express

Mongoose allows you to easily select resources by ID from your MongoDB. This is an important aspect to creating an API.

Select by ID with Mongoose and Express

React is one of the web’s most popular frameworks for building JavaScript applications. 

If you know what you’re doing, React can drastically simplify how you build, use, and maintain code.

Whether you’re a React newbie or you’re ready for advanced techniques, you can level-up with egghead. Explore our in-depth courses, lessons, and community resources to build more powerful applications and crack open your career.

react

Actions contain no functionality, but rather describe an event in our application.  In this lesson we will describe our Actions as they relate to our application.  These Actions will then be available for triggering in our Views and for execution in our Store.

React Flux: Actions

In Flux our Components are referred to as Views, but they are the same familiar Components associated with any React development.  In Flux, however, we have the benefit of the architecture to keep us from having to pass down through a long chain of children Components any functionality that may be embedded in our Stores.  In this Lesson we will wire up all of our Components in record time utilizing the architecture we've already established.

React Flux: Components/Views

Stores are where the real work in our application is done.  Dispatchers broadcast Actions to all Stores, and the Stores registered to listen for those Actions will perform any logic needed to update our Views.  In this lesson we will establish our first Store and register the Actions we wish to respond to.

React Flux: Stores

Our build process during this series will utilize both gulp and browserify.  In this lesson we will take a moment to setup our environment and all of the tooling required to begin developing our Flux Application.  We've kept the build process very simple so porting it to grunt should be a breeze, but this also serves as a simple primer for those who may not be familiar with gulp.

React Flux: Development Environment Setup

Organizing modules and components is a critical aspect of the development of any single-page web application (SPA). In this lesson we will look at refactoring the Flux React store into a more module structure.

React Flux: Project Organization

Learn how to import data into your MongoDB and then use Express to serve a simple Node.js API.

First API with Node.js, Express and MongoDB

Flux has four major components: Stores, Dispatchers, Views, and Actions.  These components interact less like a typical MVC and more like an Event Bus.  In this lesson we will start by creating our Dispatcher which queues up our Actions as Promises and executes them as they are received.  We'll also create an AppDispatcher which, unlike the Dispatcher, is more specific to our application.

React Flux: Overview and Dispatchers

As your React Flux application grows, it is inevitable that you start to see functionality and code repeated. With React, you can easily keep things DRY by using mixins.

React Flux: Remove Duplicate Code with Mixins

With this lesson, we will bring it all together, using what we've learned in the series to fisnish out the React Flux architecture example.

The completed code for this series can be found [here on Github](https://github.com/eggheadio/egghead-react-flux-example).

React Flux: Wrapping Up

By default, React doesn't have built in routing. We will add routing to our application with the react-routing-component.

React Flux: Routing with react-router-component

In this lesson you will learn how to attach Event Handlers to buttons and input fields. Event handlers normally follows the `on:[event]` format. If you are making use of two way binding you should use `bind:` instead, for example an input field could use bind:value.

Use Event Handlers in Svelte 2

Svelte is a new approach to building user interfaces. 

Instead of doing the vast majority of work at the runtime as other frameworks do, Svelte shifts that work into the _compile_ step which happens when you build your app. As such, you're shipping heavily optimized code to your users.

In this quick lesson we are going to learn how to create a brand new project with Svelte 3 from scratch.

Create a new project with Svelte 3

In most Web applications we want to be able to render different HTML markup depending on values passed in from JavaScript code.

In this lesson we are going to learn how to render JavaScript variable in HTML markup when using Svelte 3.

Add data to HTML markup using Svelte 3

In Svelte 3, the same as in regular HTML we can add CSS styles to a component and this is what we're going to learn in this lesson.

Important note - styles are _scoped to the component_ which means that if we style a `h1` tag in component A, it won't automatically affect `h1` tags in component B.

Add styles to Svelte 3 component

One of the key advantages of having a component system is the ability to render the component differently based on what kind of properties (shortened to 'props' in Svelte) were passed in to the component.

In this lesson we are going to learn how to declare properties inside of a Svelte component and how to pass in data to be rendered inside of a `<UserInfo />` component. We're also going to learn how to use default props which are used if a value for a property was not passed in.

Declare and pass in properties to a Svelte 3 component

Svelte automatically updates the DOM when your component's state changes. Often, some parts of a component's state need to be computed from other parts. This is where _reactive declarations_ come in.

In this lesson we are going to learn how to use reactive declarations to re-compute (and render) square of a counter value in a simple counter example whenever user clicks on a button.

Use reactive declarations to compute component state in Svelte 3

It's highly unlikely that we'd like to have an entire app in a single file. Instead, what we'd like to do is to spread our code across multiple components and render them in one another.

In this lesson we are going to learn how to create a `<Surname />` Svelte 3 component which we're going to use in our main `App.svelte` file to display a user's surname.

Search

Search Results