Learn Loopback, Nuxt and Xstream

This course walks you through the steps of creating a News web app using Vue.js and the Nuxt framework. You will learn how to create dynamic pages for each section of your application and load, store, display, filter, and style the data. Then end result will be a News app with multiple category pages, comments for each section, and user pages.

Vue (pronounced /vjuː/, like view) is a progressive framework for building user interfaces. Unlike other monolithic frameworks, Vue is designed from the ground up to be incrementally adoptable. The core library is focused on the view layer only, and is very easy to pick up and integrate with other libraries or existing projects. On the other hand, Vue is also perfectly capable of powering sophisticated Single-Page Applications when used in combination with modern tooling and supporting libraries.

Create a News App with Vue.js and Nuxt

In this course the developer will learn how to create a LoopBack API and build it out to an API that can be used as a backend for apps. We will start by creating a basic LoopBack API project and gradually enhance it to a production ready API. The API we create defines a few models to persist the data and has custom functionality, validation and hooks added to those models. 

After our data structure is defined we will learn how to extend the functionality of LoopBack by using mixins and components. We will also lock our API down using ACL’s and create a mechanism to automatically define the admin and user roles and create our admin user.   

The last part of the course will show how how to filter the data stored in the API. We will make the API production-ready by adding unit tests, connecting it to MongoDB and we will show how to deploy the app to now.sh.   

LoopBack is a highly-extensible, open-source Node.js framework.

loopback

Build a Node.js REST API with LoopBack

In this video you'll learn how to deploy a static Nuxt site to AWS's global edge CDN in less than two minutes. We'll start from scratch, creating a new Nuxt site using npx and walk through the build configuration to set up the deployment target for Jamstack / static site hosting. From there, we'll initialize a new Amplify project using the Amplify CLI and walk through the settings to configure the proper build command for Amplify hosting. Finally, we'll deploy and view the live site. Once we're finished, we'll delete the project and the hosting service.

Deploying a Nuxt Site to AWS with the Amplify CLI

In this video you'll learn how to use Amplify hosting to deploy a Nuxt site from a Git repository. We'll begin by walking through the steps of creating the deployment and configuring the correct build settings to enable a static build. Once the site is deployed, we'll view the live site hosted on AWS.

Deploying a Nuxt Site to AWS from a Git repository with Amplify hosting

Before each page loads, Nuxt supports pre-fetching data to render what you need on the server. This lesson walks you through using Nuxt's `fetch` to load data then save it in the Vuex store.

Load Data from APIs with Nuxt and Vuex

The Vue-CLI helps you to quickly and easily setup new Vue projects. Nuxt.js is a library that helps you build server-rendered Vue.js applications. This lesson shows you how to use the nuxt/starter template with the Vue-CLI to quickly start a new project.

Setup a "Hello World" Server-Rendered Vue.js Application with the Vue-CLI and Nuxt

Most applications require state to be shared across the application. In the case of Nuxt, you'll share state across pages. Nuxt integrates easily with Vuex by simply adding JavaScript files in the `store` directory. This lesson walks you through setting up a basic store and using it in your template

Manage Vue.js State with Vuex and Nuxt

You commit changes to state in Vuex using defined `mutations`. You can easily access these state mutations in your template using `mapMutations`. This lesson shows you have to wire together your Vue.js template with your Vuex store using mutations and mapMutations.

Update Vuex State with Mutations and MapMutations in Vue.js

You'll notice soon after working with Nuxt that you'll begin to see your styles flash in during each page load. This is due to the development mode of Nuxt where it injects the styles into the page after the initial page render. You can rest assured that when you use `nuxt build`, your styles will render before the page loads.

Understand the Flash of Unstyled Content in Nuxt

Because Nuxt renders pages on the server, you should use the `nuxt-link` components to navigate between pages. Each time a page loads, you can check if you're on the client or server and avoid doing unnecessary loading based on how the page was rendered. This lesson walks you through using `nuxt-link` and `isClient` to navigate and avoid reloading data.

Navigate with nuxt-link and Customize isClient Behavior in Nuxt and Vue.js

You can isolate parts of templates you want to re-use into components, but you can also reuse those components across pages using layouts. This lesson walks you through creation a navigation component then extracting it out into the default layout.

Build a Navigation Component in Vue.js and Use in a Nuxt Layout

You can easily add CSS libraries to Nuxt using `yarn` or `npm` to install them, then simply adding them to the `nuxt.config.js` so they're included in each page. Then all the classes will be available for use in all of your templates. This lesson walks your through installing a library then adding it to your `nuxt.config.js`.

Add CSS Libraries to Nuxt

In a server-rendered application, if you attempt to load data before the page renders and the data fails to load, your application will not run unless you handle the error properly. This lesson walks you through the options of handling load errors so that your users will always have a good experience.

Handle Load Errors in Nuxt with Alternate Data, Redirect, or Error Layout

You often use the same data in different ways across pages. This lesson walks you through setting up multiple pages, retrieving the same data, then displaying it for each page's use-case.

Display Vuex Data Differently in Each Page of Nuxt and Vue.js

A relation in LoopBack is a way to associate the data from multiple models with each other. LoopBack supports various types of relations each with a different use case.

In this lesson we will create a second model called Category and create a relation between the Category and the Product models. To do this we will first add a property to the Product model called `categoryId`. This will allow us to store for each Product the category it belongs to. We then move on to create the actual relationships. 

Our first relationship defines that a `Category hasMany Products` and the second one that a `Product belongsTo a Category`.

After defining these relations we will use the API Explorer to see how we can interact with this related data.

Create a relation between two LoopBack models

In this lesson we will look at the filters that can be used to retrieve and manipulate the data stored in LoopBack. 

We will use [Postman](https://www.getpostman.com/) to interact with the `/Categories` and `/Products` endpoints. 

Using the URL parameters we will apply at the various filters LoopBack has to offer: `include`, `order`, `where`, `fields`, `limit` and `offset`. 

Filter model data in LoopBack

In this lesson we look at extending the functionality of LoopBack models by defining a remote method. 

A remote method is a method on a model exposed over a custom REST endpoint. 

Using the `lb remote-method` command we will create the remote method meta-data in `product.json`. We will verify that this got created and that we see the new REST endpoint got added. Then we will create the actual method in `product.js` and enhance it so that the API will return an error if we want to buy a negative amount of products.

Define a remote method on a LoopBack model

In this lesson we will create a dynamic datasource in LoopBack. If the API is started with the environment variable `MONGODB_URL` it will use this url and the `loopback-connector-mongodb` package to store the data in MongoDB.

In the course we will use a local MongoDB instance. If you don't have MongoDB running locally you can always create a [free MongoDB Atlas database](https://egghead.io/lessons/create-a-free-database-on-mongodb-atlas).


Create a MongoDB DataSource in LoopBack

In this lesson you will learn how to persist the data from the memory connector. As the name suggests, the memory connector stores the data in memory. This means that if you restart the server, the data is gone. In development mode it can be useful to store this data in a file, so it gets persisted between server restarts, and it can be easily inspected.

Persist in-memory data to a file when developing Node.js LoopBack API's

In this lesson we will learn to create a development mode for our server. We do this by installing nodemon as a dev dependency and creating a script tag called 'dev'. 

This script tag will execute the command `nodemon server/server.js --watch common --watch server`.  

We can execute this command by running `npm run dev`. 

When running in development mode the server will be automatically restarted when there are changes detected in the `common` and `server` directories.

Setup a development mode in LoopBack API using nodemon

In this lesson we will learn how to protect our API using ACL’s. 

ACL stands for Access Control List and it's function is to control permissions of resources in the API. It does this by keeping a mapping between an API resource and a principal. An API resource as an API endpoint like a remote method or a whole model. A principal in LoopBack are users or applications that can be grouped in a role.

In order to get the API production ready we will protect a selection of our REST endpoints with ACL’s. We will look at how we can obtain an access token and how we can use that in our requests.

Finally we will write some unit tests to make sure that the ACL does what we expect. We enhance our test setup by exporting `request` with is provided by the [supertest](https://www.npmjs.com/package/supertest) library.

In our tests we use `request` to verify that our endpoints return the correct HTTP status code.  

Topics

Instructors

Content Type